2007 Yukon. Lost 1st and reverse gears in transmission. Replacement options?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Marky Dissod

Full Access Member
Joined
Mar 3, 2023
Posts
1,895
Reaction score
2,598
Location
(718)-
I have not done anything to it yet. Just looking for the part.
So I have the 6L80E. Interesting. Then why did it fail if it's more robust?
You say you have not yet done anything to it.
Does that include not changing the ATF? If so, how many miles has it gone without an ATF change?
 

Geotrash

Dave
Supporting Member
Joined
Feb 16, 2018
Posts
6,424
Reaction score
15,917
Location
Richmond, VA
I have not done anything to it yet. Just looking for the part.
So I have the 6L80E transmission. Interesting. Then why did it fail if it's more robust? I never towed with it.
The '07 has an early version of the 6L80 before it was in the field long enough for weaknesses in the design or manufacturing process to show up. In Nick's 6L80 thread, he details what those are. And many of them have little to do with how it's used. Its design is quite stout in terms of power handling capabilities, but there are problems like the TC, and one of the clutch drums that has weak welds, and check balls in the valve body that can show up as problems. Honestly though, 17 years out of a transmission ain't bad.
 
OP
OP
D

dictum

Full Access Member
Joined
Oct 13, 2021
Posts
100
Reaction score
40
Strangely, the problem went away after being present for a few weeks. No grinding when going in or out of the first or reverse.

could it be something else, not the transmission? Like the AWD component in it? Should I change the oil in it?
 

NickTransmissions

Sin City
Supporting Member
Joined
Mar 9, 2023
Posts
1,088
Reaction score
2,613
Location
The transmission bench
Strangely, the problem went away after being present for a few weeks. No grinding when going in or out of the first or reverse.

could it be something else, not the transmission? Like the AWD component in it? Should I change the oil in it?
It could be or it may have been something else not associated with the transmission or t-case entirely. Generally, once the transmission starts grinding, it's not long before it stops working correctly all togther. Obviously, those things dont fix themselves (as much as we wish they did)....If you havent done a t case fluid change, id go ahead with it - drain the fluid in a catch pan so you can inspect it...stir it slowly with a telescope magnet so any larger metal pieces get caught on it if present in the fluid.

Otherwise keep an eye/ear out for it...
 
OP
OP
D

dictum

Full Access Member
Joined
Oct 13, 2021
Posts
100
Reaction score
40
What fluid do I put in the transfer case?
 

Forum statistics

Threads
132,301
Posts
1,865,632
Members
96,885
Latest member
BinOdhaib
Top