mcmacgyver
TYF Newbie
- Joined
- Feb 3, 2016
- Posts
- 1
- Reaction score
- 0
I have a 2008 gmc Yukon with 24 inch replica rims. I have belltech 2 inch drop spindles and belltech lower struts set to a .5 inch drop. and belltech 4 inch lower kit in the rear. problem is the passenger front wheel sticks out and 1/2 inch further then the driver side. the truck is aligned wheels are dead straight up and down and left to right. I have taken a tape measure and measured from the upper control arm to the back and front of the brake rotor. and checked the back spacing of the rims. can not figure this out. any help?
