2010 Escalade Lowered NORCAL SS 07 2/3-4 Cornering Kit

[Sho'Tyme]

Looks good...

 

[chug]

Looks good

 

[Deephaven]

BACK IS easy to bring down

1) go to hardware store get a 10x24x2.5 inch long machine screw
2) cut off the head
3) replace the ones you have in the rear now
4) truck will come down

Thanks Tony.

Of course the threaded rods that came with the kit wouldn't screw in nice so they are JB Welded in place. Going to need to buy new ends. Not a big deal I suppose. If anyone knows the part numbers that'd be great.

Is it a linear lowering? ie, if I shorten the bolt by .5" is that what the truck will come down?

Front is perfect btw, just want to equalize it a notch. In a perfect world lower all around would be good, but this is my daily in Minnesnowta.

---------- Post added at 08:33 AM ---------- Previous post was at 08:30 AM ----------

Also curious where you got the gauge holder Tony....I know where you got the gauge

 

[Deephaven]

What about using something like these?
http://www.speedwaymotors.com/Speed...male-Heim-Joint-Rod-Ends-with-Stud,10991.html

 

[NORCAL SS]

bump to top. Great kit!!