I just put a double din navi in my wife's 2014 Yukon with a factory backup camera. Is there somewhere I can tap into the rear view backup camera to get it on the aftermarket navigation screen. Location and wire colors would be great. Thanks in advance!!
2014 Yukon factory backup camera wires??
- Thread starter 93-306
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Adam Ostrowski
TYF Newbie
- Joined
- Oct 12, 2016
- Posts
- 1
- Reaction score
- 1
I have the same year and what I did was went up to the connection that is on the rearview mirror.
It was the blue and white wire that is next to each other. i pealed back the coating and soldered it to make it solid.
I ran a wire from the mirror above the headliner and down the A pillar.
After that it is just connecting it to the radio.
I spent a lot of time researching and didn't get any real good leads on where the best connection was.
This was what i got to work.
With doing this both monitors showed the image
It was the blue and white wire that is next to each other. i pealed back the coating and soldered it to make it solid.
I ran a wire from the mirror above the headliner and down the A pillar.
After that it is just connecting it to the radio.
I spent a lot of time researching and didn't get any real good leads on where the best connection was.
This was what i got to work.
With doing this both monitors showed the image
Similar threads
