2015 Denali-6.2L Broken valve spring

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

07denaliyuk

TYF Newbie
Joined
Jun 17, 2011
Posts
26
Reaction score
9
Location
SE Michigan
Just got the bad news, zero compression on cylinder 7 due to broken valve spring. Crap!
Intake side. 80k miles
Covered under warranty by it gives me concerns. Also, dealership says they can replace it without removing the head, how?

? are any others going to break?
? Anyone else have the same issue?
 

iamdub

Full Access Member
Joined
Apr 23, 2016
Posts
20,821
Reaction score
44,950
Location
Li'l Weezyana
The valve springs are on the topside of the head which makes them accessible simply by removing the rocker cover (AKA valve cover). I'd be concerned about damage to the piston if it contacted the valve.

No one without a magic crystal ball can answer if others will break.

Someone recently posted about engine trouble on a their 2015+, but I think it was a lifter failure. It would be something to Google for.
 

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
19,747
Reaction score
26,633
Location
Treasure Coast, Florida
A lady just joined the forum and recently had a 6.2 that broke one of the #8 springs. One can examine the piston top through the spark plug hole with a bore camera.

I was surprised to learn that these engines have beehive single springs, all of my old GM cars from the 1970s through 1990s and I think even my 2000s GM minivans all use double springs. If one should break, the inner spring keeps the valve from kissing the piston and doing more damage. Never had one break.

Having learned that, I am considering double springs but the price is considerably more. Of course, should a spring break, they would seem a bargain!
 
OP
OP
0

07denaliyuk

TYF Newbie
Joined
Jun 17, 2011
Posts
26
Reaction score
9
Location
SE Michigan
If the valve dropped and contacted the piston it would likely be bent and they’d have to pull the head to replace it.

@iamdub; I understand getting to the valve springs, but don’t know how they would keep the valve closed while they compress the spring and inset the cap and lock without back pressure from the underside of the head. Maybe they use compressed air to hold up the valve while they do it. I’ve asked to see the opened up engine on Monday when they have the part, it had to be ordered in.
 

jason952

Member
Joined
Nov 18, 2011
Posts
56
Reaction score
32
Yes , compressed air to hold valve closed


Sent from my iPhone using Tapatalk
 

iamdub

Full Access Member
Joined
Apr 23, 2016
Posts
20,821
Reaction score
44,950
Location
Li'l Weezyana
If the valve dropped and contacted the piston it would likely be bent and they’d have to pull the head to replace it.

@iamdub; I understand getting to the valve springs, but don’t know how they would keep the valve closed while they compress the spring and inset the cap and lock without back pressure from the underside of the head. Maybe they use compressed air to hold up the valve while they do it. I’ve asked to see the opened up engine on Monday when they have the part, it had to be ordered in.


There's a chance the spring broke but still kept the valve high enough to not drop onto the piston. Small chance, but the coils could've snagged each other. Yes, to replace the valve spring(s), they thread an adapter into the spark plug hole and blow air into the chamber to hold the valves closed.

I'd like to believe the dealership mechanic scoped the chamber during their diagnostics.
 

AZRiverRunner

Member
Joined
Mar 7, 2015
Posts
97
Reaction score
43
The valve springs are on the topside of the head which makes them accessible simply by removing the rocker cover (AKA valve cover). I'd be concerned about damage to the piston if it contacted the valve.

No one without a magic crystal ball can answer if others will break.

Someone recently posted about engine trouble on a their 2015+, but I think it was a lifter failure. It would be something to Google for.

They can do a compression test to make sure the valve isn't damaged, you can have them use an optical scope through where the spark plug goes to view the piston and cylinder wall. As someone else said, you can pressurize the cylinder with air to hold the valve in place when they install the new spring/retainer/rocker arm.
 

Todd Gilkison

TYF Newbie
Joined
Nov 13, 2018
Posts
4
Reaction score
0
Just got the bad news, zero compression on cylinder 7 due to broken valve spring. Crap!
Intake side. 80k miles
Covered under warranty by it gives me concerns. Also, dealership says they can replace it without removing the head, how?

? are any others going to break?
? Anyone else have the same issue?
Seems to be a more common issue then GM says. 2015 yukon with 70k miles just had broken spring on #2 intake. Lucky enough it held valve high enough from damaging piston. It did mess up valve guide. They are replacing head valve springs and 1 rocker. Mechanic made mention of Yellow top springs from factory, but they have changed them now to a blue top he thought. Still waiting on what GM sends to see. Sure tempted to change springs on other head.
 

Forum statistics

Threads
132,717
Posts
1,873,138
Members
97,542
Latest member
RRogerson
Top