2015 GMC YukonXL- Fox Coilovers

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
Nokturnal

Nokturnal

Full Access Member
Joined
Jul 25, 2018
Posts
154
Reaction score
169
Do you have a close up pic of the wheel tire setup? What setup did you go with? It looks great from the side

Nitto came out with a non 10ply 295/70 34.3” tall and 11.7” wide. It weighs 15lb less than the LT295/70. Perfect for us highway queens that hardly ever tow or go off-road but want the same aggressive look.

The wheel is 18x9.5 -18 offset. Just have to wait to get the lift installed before I can fit and trim for these to be put on. The rock crawler suburban on the first page was the offset I was shooting for. Slightly outside fender.

A26AD5CD-8303-4A61-86F3-389FBB7C1351.jpeg 8FA73CB0-D16C-4069-9FAA-0A9543700BDC.jpeg 3C9ED2BE-0C46-442B-9E8F-06E1FBEB74D3.jpeg 177CBE18-FAC9-4CC3-B2F5-2CAF35E6DFBA.jpeg
 

Cadi_Mike

TYF Newbie
Joined
Aug 15, 2019
Posts
18
Reaction score
15
Location
Austin TX
Nitto came out with a non 10ply 295/70 34.3” tall and 11.7” wide. It weighs 15lb less than the LT295/70. Perfect for us highway queens that hardly ever tow or go off-road but want the same aggressive look.

The wheel is 18x9.5 -18 offset. Just have to wait to get the lift installed before I can fit and trim for these to be put on. The rock crawler suburban on the first page was the offset I was shooting for. Slightly outside fender.

View attachment 266545 View attachment 266546 View attachment 266548 View attachment 266549
Looks great man, thanks for sharing. I think I'll do something very similar for sizing. Definitely have our work cut out for trimming but seems doable. My personal concern for my truck is the power steps may be in the way of trimming behind the front tires. We will see when we get there

Sent from my Pixel 2 XL using Tapatalk
 
OP
OP
Nokturnal

Nokturnal

Full Access Member
Joined
Jul 25, 2018
Posts
154
Reaction score
169
Looks great man, thanks for sharing. I think I'll do something very similar for sizing. Definitely have our work cut out for trimming but seems doable. My personal concern for my truck is the power steps may be in the way of trimming behind the front tires. We will see when we get there

Sent from my Pixel 2 XL using Tapatalk


If they’re the factory power steps you will have to take off the plastic end caps and trim the board back and pop the cap back on. I had to do that with my last ones. Someone had a good post on here about trimming them back, but it was pretty easy once you know you can pop the end off.

I’m going to throw some AMP on this XL
 

DADW4GN

Member
Joined
Nov 10, 2020
Posts
40
Reaction score
52
Location
Kansas City, MO
If they’re the factory power steps you will have to take off the plastic end caps and trim the board back and pop the cap back on. I had to do that with my last ones. Someone had a good post on here about trimming them back, but it was pretty easy once you know you can pop the end off.

I’m going to throw some AMP on this XL

Get that AMP order in...I ordered mine late October for my XL and still waiting...
 
OP
OP
Nokturnal

Nokturnal

Full Access Member
Joined
Jul 25, 2018
Posts
154
Reaction score
169
Get that AMP order in...I ordered mine late October for my XL and still waiting...


They had over 50 in stock at the wholesaler here in TX. Ordered them today and they’ll be here tomorrow. Knight’s In Lubbock Texas is doing my install and where I ordered them.
 

DADW4GN

Member
Joined
Nov 10, 2020
Posts
40
Reaction score
52
Location
Kansas City, MO
They had over 50 in stock at the wholesaler here in TX. Ordered them today and they’ll be here tomorrow. Knight’s In Lubbock Texas is doing my install and where I ordered them.

Ugh...I ordered direct from AMP. Thanks for the tip!
 

Forum statistics

Threads
132,367
Posts
1,866,830
Members
96,992
Latest member
a-reem

Latest posts

Top