2015 Tahoe/Grinding/rough noise from front of vehicle

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
fatmonk8

fatmonk8

Full Access Member
Joined
Mar 16, 2023
Posts
194
Reaction score
55
Gear oil replaced, bearing replaced, seal replaced.

Everything is bolted back up.

Still a crunch noise. Regardless if in 4wd or 2wd
 

wjburken

Supporting Member
Joined
Dec 26, 2017
Posts
9,957
Reaction score
27,558
Location
Eastern Iowa
Gear oil replaced, bearing replaced, seal replaced.

Everything is bolted back up.

Still a crunch noise. Regardless if in 4wd or 2wd
Did you open up the differential or just swap the bearing? With that much play, and the amount of debris you had on the plug, I would want to see what's going on inside.
 
OP
OP
fatmonk8

fatmonk8

Full Access Member
Joined
Mar 16, 2023
Posts
194
Reaction score
55
Did you open up the differential or just swap the bearing? With that much play, and the amount of debris you had on the plug, I would want to see what's going on inside.
I did not open it up. That was going to be my next endeavor of this was a bust
 
OP
OP
fatmonk8

fatmonk8

Full Access Member
Joined
Mar 16, 2023
Posts
194
Reaction score
55
Did you open up the differential or just swap the bearing? With that much play, and the amount of debris you had on the plug, I would want to see what's going on inside.
It has to be removed to be opened?
 
OP
OP
fatmonk8

fatmonk8

Full Access Member
Joined
Mar 16, 2023
Posts
194
Reaction score
55
Man I finally got brave enough to jack all 4 off the ground and out it in driver in both 2wd and 4wd. Felt super sketchy lol.

But I didn't hear a dang thing.
 
Last edited:
OP
OP
fatmonk8

fatmonk8

Full Access Member
Joined
Mar 16, 2023
Posts
194
Reaction score
55
I also dont see any big or small pieces of metal in the old fluid either
 

Attachments

  • 20230728_182842.jpg
    20230728_182842.jpg
    182 KB · Views: 4

Forum statistics

Threads
132,364
Posts
1,866,742
Members
96,985
Latest member
LeanMachine
Top