2015 Yukon w/ leveling kit & 33x12.5x22 on OEM wheels

[Triton2690]

Installing the Rough Country pre loaded front leveling struts and 33x12.5x22 BFG KO2’s…my question is what wheel spacers to use? And secondly is there any need to use a wider spacer on the rear? I’m thinking of using BORA 1.75” on the front and 2” on the rear. Thoughts and pics would be great! Thank you

 

[mguidry629]

I have stock 22" Denali wheels with Toyo AT3 33x12.5x22. Leveling kit in the front. No spacers. I don't think you will need spacers, but if you do, I don't think you will want much more than 1" or the outside of the tires will rub on the fender well. Let us know how it goes!

 

[Triton2690]

Well…I installed the leveling kit and tires and went with 1.5” spacers all the way around. It looks great but, as you said, the tires are rubbing the fender well when I turn . Looking at options at this point…NorCal mod, smaller spacers, or removing them altogether. You are running 33’s with no spacers…do your tires not rub the upper control arm?