2019 Tahoe air suspension

[Mgrantham1683]

Heard a pop driving the other day. Now compressor sounds like it’s rattling when running. Y’all have any idea what kind of repair I’m looking at and ballpark costs? Thanks

 

[Joseph Garcia]

We cannot talk about a repair or costs, until we determine the cause and extent of the issue.

Does the compressor shut off it less than 10 seconds, when you hear it rattling?

Have you checked the shocks to see if the air line connectors are still connected to the shocks?

 

[Miami-Dade]

Heard a pop driving the other day. Now compressor sounds like it’s rattling when running. Y’all have any idea what kind of repair I’m looking at and ballpark costs? Thanks

Moved you here from 2021+section.

 

[Mgrantham1683]

We cannot talk about a repair or costs, until we determine the cause and extent of the issue.

Does the compressor shut off it less than 10 seconds, when you hear it rattling?

Have you checked the shocks to see if the air line connectors are still connected to the shocks?

Runs for about 15-20 seconds, I can’t see any loose lines but I haven’t pulled the compressor off.

 

[Joseph Garcia]

Runs for about 15-20 seconds, I can’t see any loose lines but I haven’t pulled the compressor off.

That's a fairly long time for it to consistently run.

Perform the soapy water squirt bottle test and spray the shocks air bladders and air line connections to see if you have an air leak.

 

[Mgrantham1683]

That's a fairly long time for it to consistently run.

Perform the soapy water squirt bottle test and spray the shocks air bladders and air line connections to see if you have an air leak.

Ok thanks, I’ll do that when I get the time. Made an appt at the shop to have it looked at next week in case it’s not a simple fix.

 

[Doubeleive]

Ok thanks, I’ll do that when I get the time. Made an appt at the shop to have it looked at next week in case it’s not a simple fix.

shop's going to bend you over, you can fix it yourself for a lot less.
the air-ride system is not complicated

 

[Joseph Garcia]

^^^^^x2^^^^^

If you can do simple wrenching, you can fix this yourself and save a lot of labor costs.

 

[Mgrantham1683]

^^^^^x2^^^^^

If you can do simple wrenching, you can fix this yourself and save a lot of labor costs.

I can handle that. Any good guys on YouTube yall recommend for a guide?

 

[k_arnold72]

I would suggest watching multiple how to's instead of trusting one source. You can learn a little bit from each one, comparing what parts of the process are done the same or differently.