That's a hell of a set of wheels for a "farm truck". Rust? $10k out of Wyoming?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
THIS.Unfortunately there's quite a few engine issues being reported out there on the interwebz with these. But since percentages are the name of the game it's hard to say if it's any worse or better than it has been in previous generations. I wonder what things would look like if the internet forums were as prominent back in '95.
Unfortunately there's quite a few engine issues being reported out there on the interwebz with these. But since percentages are the name of the game it's hard to say if it's any worse or better than it has been in previous generations. I wonder what things would look like if the internet forums were as prominent back in '95.
I had the exact same problem with my 21 Yukon except it was cylinders 6/8 back in April.Beyond pissed off!! With 7,350 miles Engine started very rough, jerks on acceleration, Trans shifting very ******* all shifts. Instrument panels indicated service traction control, forward collision system unavailable, check engine light, etc.
Scanned DTC codes,found cylinders 2 misfire.
Found damaged lifter, replaced Cyl 2/4 lifters,lift guide,cylinder pushrod replaced that was bent. Replaced cylinder 2 sparkplug, performed oil change, vacuum filled coolant, cleared DTC Codes.
Same issue here. Got our 2021 Z71 Tahoe in April. Between 7-8k miles we had the same problem. Dealer service diagnosed the issue to be the lifters. The factory had them in stock but the gaskets are on back order with no delivery date in sight. GM also told us there is a recall regarding the screen not functioning in cold temperatures.Beyond pissed off!! With 7,350 miles Engine started very rough, jerks on acceleration, Trans shifting very ******* all shifts. Instrument panels indicated service traction control, forward collision system unavailable, check engine light, etc.
Scanned DTC codes,found cylinders 2 misfire.
Found damaged lifter, replaced Cyl 2/4 lifters,lift guide,cylinder pushrod replaced that was bent. Replaced cylinder 2 sparkplug, performed oil change, vacuum filled coolant, cleared DTC Codes.