2022 Wont start after remote start

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

olyelr

Full Access Member
Joined
Mar 19, 2011
Posts
1,699
Reaction score
835
Location
Elk Rapids, MI
Added link to signature for ease of use for others :fuckyea:


Edit: Going to design something to hold a 10mm box wrench out of sight so not to rattle around....overkill..yes, but why not :grd:


Nothing wrong with that haaaaaa. Although I tossed one in the glovebox and have never heard it since.
 

ColeBlooded

Full Access Member
Joined
Jul 26, 2022
Posts
119
Reaction score
88
Location
Los Angeles
Happened to me this morning. The worst day it could happen. Had things to do. I assumed it was fixed on the '23 but I guess not.
 

Fcamizzi

TYF Newbie
Joined
May 25, 2023
Posts
1
Reaction score
0
Happened to my wife’s 4 month old Yukon the other day. Disconnected the battery for a few seconds and tried to start it right after, same issue. Disconnected the battery again and left it that way for 15-20 minutes. Reconnected and started it with the button on the dash and haven’t had the issue again in the last month. We stopped using the automatic start after that.
 

Silverado4x4

Full Access Member
Joined
Jan 15, 2023
Posts
120
Reaction score
145
Location
Maryland
There is a TSB out on this but I am unable to find the number

Brand:​
Model:​
Model Year:​
VIN:​
Engine:​
Transmission:​
from​
to​
from​
to​
Cadillac​
Escalade Models​
2022​
2023​
Chevrolet​
Silverado 1500 New (RPO J22, VIN Digit 5 = A / D)​
2022​
2022​
Silverado 1500​
2023​
2023​
Suburban​
2022​
2023​
Tahoe​
2022​
2023​
GMC​
Sierra 1500 New (RPO J22, VIN Digit 5 = H / U)​
2022​
2022​
Sierra 1500​
2023​
2023​
Yukon
Yukon XL​
2022​
2023​

Involved Region or Country
America, Uzbekistan, Middle East, Russia, Israel, Palestine, Bolivia, Chile, Colombia, Ecuador, Peru, Japan, Kazakhstan, Korea, Thailand​
Additional Options (RPOs)
Condition
Some customers may comment that after using the remote vehicle start, either from the fob or app, they experienced any of the following issues:
  • When they enter the vehicle and press the start button the engine stalls
  • If they try to restart the engine, it will not crank
  • If the remote start times out they are unable to restart the engine with the start button
  • When trying to turn engine off the engine stays running
  • Unable to turn the ignition off
  • Service Steering Column Lock Message, if equipped
  • Dead Battery
Cause
The cause of the condition may be a Body Control Module (BCM) messaging issue.​
Correction
Reprogram the BCM following service information instructions to update to the newest
This Service Bulletin is replacing PIT5873G. Please discard all previous copies of PIT5873G.

Brand:​
Model:​
Model Year:​
VIN:​
Engine:​
Transmission:​
from​
to​
from​
to​
Cadillac​
Escalade Models​
2022​
2023​
Chevrolet​
Silverado 1500 New (RPO J22, VIN Digit 5 = A / D)​
2022​
2022​
Silverado 1500​
2023​
2023​
Suburban​
2022​
2023​
Tahoe​
2022​
2023​
GMC​
Sierra 1500 New (RPO J22, VIN Digit 5 = H / U)​
2022​
2022​
Sierra 1500​
2023​
2023​
Yukon
Yukon XL​
2022​
2023​

Involved Region or Country
America, Uzbekistan, Middle East, Russia, Israel, Palestine, Bolivia, Chile, Colombia, Ecuador, Peru, Japan, Kazakhstan, Korea, Thailand​
Additional Options (RPOs)
Condition
Some customers may comment that after using the remote vehicle start, either from the fob or app, they experienced any of the following issues:
  • When they enter the vehicle and press the start button the engine stalls
  • If they try to restart the engine, it will not crank
  • If the remote start times out they are unable to restart the engine with the start button
  • When trying to turn engine off the engine stays running
  • Unable to turn the ignition off
  • Service Steering Column Lock Message, if equipped
  • Dead Battery
Cause
The cause of the condition may be a Body Control Module (BCM) messaging issue.​
Correction
Reprogram the BCM following service information instructions to update to the newest software level​
 

StephenPT

Full Access Member
Joined
Jan 16, 2022
Posts
1,106
Reaction score
1,080
Location
St. Helens, OR
There is a TSB out on this but I am unable to find the number

from​
to​
from​
to​
Brand:​
Model:​
Model Year:​
VIN:​
Engine:​
Transmission:​
Cadillac​
Escalade Models​
2022​
2023​
Chevrolet​
Silverado 1500 New (RPO J22, VIN Digit 5 = A / D)​
2022​
2022​
Silverado 1500​
2023​
2023​
Suburban​
2022​
2023​
Tahoe​
2022​
2023​
GMC​
Sierra 1500 New (RPO J22, VIN Digit 5 = H / U)​
2022​
2022​
Sierra 1500​
2023​
2023​
Yukon
Yukon XL​
2022​
2023​

Involved Region or Country
America, Uzbekistan, Middle East, Russia, Israel, Palestine, Bolivia, Chile, Colombia, Ecuador, Peru, Japan, Kazakhstan, Korea, Thailand​
Additional Options (RPOs)
Condition
Some customers may comment that after using the remote vehicle start, either from the fob or app, they experienced any of the following issues:​
  • When they enter the vehicle and press the start button the engine stalls
  • If they try to restart the engine, it will not crank
  • If the remote start times out they are unable to restart the engine with the start button
  • When trying to turn engine off the engine stays running
  • Unable to turn the ignition off
  • Service Steering Column Lock Message, if equipped
  • Dead Battery
Cause
The cause of the condition may be a Body Control Module (BCM) messaging issue.​
Correction
Reprogram the BCM following service information instructions to update to the newest
This Service Bulletin is replacing PIT5873G. Please discard all previous copies of PIT5873G.​

from​
to​
from​
to​
Brand:​
Model:​
Model Year:​
VIN:​
Engine:​
Transmission:​
Cadillac​
Escalade Models​
2022​
2023​
Chevrolet​
Silverado 1500 New (RPO J22, VIN Digit 5 = A / D)​
2022​
2022​
Silverado 1500​
2023​
2023​
Suburban​
2022​
2023​
Tahoe​
2022​
2023​
GMC​
Sierra 1500 New (RPO J22, VIN Digit 5 = H / U)​
2022​
2022​
Sierra 1500​
2023​
2023​
Yukon
Yukon XL​
2022​
2023​

Involved Region or Country
America, Uzbekistan, Middle East, Russia, Israel, Palestine, Bolivia, Chile, Colombia, Ecuador, Peru, Japan, Kazakhstan, Korea, Thailand​
Additional Options (RPOs)
Condition
Some customers may comment that after using the remote vehicle start, either from the fob or app, they experienced any of the following issues:​
  • When they enter the vehicle and press the start button the engine stalls
  • If they try to restart the engine, it will not crank
  • If the remote start times out they are unable to restart the engine with the start button
  • When trying to turn engine off the engine stays running
  • Unable to turn the ignition off
  • Service Steering Column Lock Message, if equipped
  • Dead Battery
Cause
The cause of the condition may be a Body Control Module (BCM) messaging issue.​
Correction
Reprogram the BCM following service information instructions to update to the newest software level​
 

ddivinia

Member
Joined
Dec 3, 2021
Posts
43
Reaction score
34
Has this issue been resolved? I am still not using my remote start on my 2022 Z71.

Thanks,
D.
 

Toy Slacker

TYF Newbie
Joined
Feb 15, 2024
Posts
1
Reaction score
0
Location
Connecticut
It's resolved if you get the BCM update per the TSB. I've not had it since then and have remote started numerous times.
This is so interesting. I have a 23 Yukon Denali 6.2... started getting a Check Engine light a week or two ago... goes on for a couple days... off for a couple days... going to take it in next week.

But it's never stalled after using the remote start, sometimes the remote start won't work, but I guess I will hold off using it until it goes in.

The code is weird though:
ECM - Engine System
P0E32
The Lithium-Ion Battery is not performing as expected. An issue has been detected in the Battery System which is a high voltage battery used to propel your vehicle.

Happening at 10K miles, 12 months old.

Glad I found this thread!
 

WalleyeMikeIII

Full Access Member
Joined
Feb 22, 2022
Posts
2,260
Reaction score
1,850
Location
Sunny and Snowy Minnesota
This is so interesting. I have a 23 Yukon Denali 6.2... started getting a Check Engine light a week or two ago... goes on for a couple days... off for a couple days... going to take it in next week.

But it's never stalled after using the remote start, sometimes the remote start won't work, but I guess I will hold off using it until it goes in.

The code is weird though:
ECM - Engine System
P0E32
The Lithium-Ion Battery is not performing as expected. An issue has been detected in the Battery System which is a high voltage battery used to propel your vehicle.

Happening at 10K miles, 12 months old.

Glad I found this thread!
That is an incorrect decode, there is no High Voltage LithiumIon battery in the Yukon. And, any active Check Engine Light/ECM code will inhibit a remote start. Get it in if CEL is on.
 
Top