2023 Yukon: Can you lock doors with engine running?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

KingAK55

TYF Newbie
Joined
Jan 12, 2022
Posts
23
Reaction score
2
Just bought the wifey a 2023 Yukon AT4 and she is wondering how to lock the doors after exiting the vehicle while the engine is running? I'm not sure if its a safety feature, but if its a setting that can be changed, any advice would be appreciated! Thank you :)
 
Last edited:

WalleyeMikeIII

Full Access Member
Joined
Feb 22, 2022
Posts
2,290
Reaction score
1,882
Location
Sunny and Snowy Minnesota
So, the doors automatically lock when all the doors are closed, then engine is running, and the vehicle is shifted out of park.

You can hit the lock button on the door panel if you want to lock before the auto lock. Check "Door Locks" section of your owners manual...probably about page 16.

Manual says "automatic door locking cannot be disabled. Automatic door unlocking can be programmed. See Vehicle Personalization"
The personalization settings are on page 101 I think. Net is you can set the unlock to be Off, Driver Door, or All Doors.
 
OP
OP
K

KingAK55

TYF Newbie
Joined
Jan 12, 2022
Posts
23
Reaction score
2
So, the doors automatically lock when all the doors are closed, then engine is running, and the vehicle is shifted out of park.

You can hit the lock button on the door panel if you want to lock before the auto lock. Check "Door Locks" section of your owners manual...probably about page 16.
I'm so sorry, huge oversight on my part. I want to know about locking the vehicle when she gets out, but wants to keep engine running (for the pup).
 

WalleyeMikeIII

Full Access Member
Joined
Feb 22, 2022
Posts
2,290
Reaction score
1,882
Location
Sunny and Snowy Minnesota
Check Page 16, and into Page 17...under lockout protection; Suggest holding down the lock switch on the inside door panel, next to the door release handle...or possibly on the fob, not sure...screen shot below.

1660753864488.png
 

Tom-M

TYF Newbie
Joined
Dec 6, 2021
Posts
23
Reaction score
17
I use the keyfob to lock the doors after I get out and leave the engine running.
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
26,499
Reaction score
39,869
Location
Stockton, Ca.
same procedure you would do for auto-starting, when you autostart the doors should lock by default if they are not locked already
 
OP
OP
K

KingAK55

TYF Newbie
Joined
Jan 12, 2022
Posts
23
Reaction score
2
same procedure you would do for auto-starting, when you autostart the doors should lock by default if they are not locked already
Yea her work around has been to turn car off, lock, and then remote start it. I havent had much time to play with the vehicle since we got it.
 
OP
OP
K

KingAK55

TYF Newbie
Joined
Jan 12, 2022
Posts
23
Reaction score
2
I use the keyfob to lock the doors after I get out and leave the engine running.
Hm ok. Maybe she is doing something wrong. Will get a chance later today to check it out.
 

aboss3

TYF Newbie
Joined
Mar 17, 2022
Posts
28
Reaction score
6
I always use the key fob on my 22 and it locks the doors. Keep in mind the engine will shut down after 15 min with keys outside of the vehicle, and a bit longer if you’re inside with the keys (but then cannot lock it :) ).
 

Blueinterceptor

Full Access Member
Joined
Jan 20, 2016
Posts
982
Reaction score
553
You can disable the shut off by holding the push to start button when you start the truck. And I use the key fob to lock the door and want to run the engine. Same reason too. For my dogs and fullA/C
 

Forum statistics

Threads
132,730
Posts
1,873,288
Members
97,558
Latest member
BurbyRST

Latest posts

Top