2024 Yukon AT4 with Fuel Blitz rims and Toyo AT3s

[djnice]

I installed it myself. Install would probably cost $400. This kit does the job, but I think the Ready lift 3" kit is better quality. I wanted a little shorter so I can fit in the garage.

2.5 Inch Lift Kit | Magneride | GMC Yukon 4WD (2021-2024)

2.5 Inch Lift Kit | Magneride | GMC Yukon 4WD (2021-2024)

www.roughcountry.com

 

[djnice]

Shows why relocation brackets are needed. They only come with ready lift kits.

 

[TexasYukon2]

Sharing a few photos of my Yukon with original wheels/tires and aftermarket. Not great photo weather. I might add some others when the sun comes back.
- Wheels are 20x9 Fuel Blitz +1 offset
- Tires are P rated 285/60/20 Toyo Open Country AT3

It is pretty much what I was after. I will get a lift installed next. Tires rub forward and reverse as expected with the +1 offset. So far the Toyo’s are quiet and ride good. Maybe a little hum on smooth pavement at 40 to 50.

View attachment 422684

It does have OEM wheels and tires loading down the back in this picture so it's sitting a little low.

View attachment 422685

Looks good now swap out running boards for Suburban tube side steps I found some for mine on Facebook looks more off road

 

[djnice]

Relocate brackets made from some spare parts I had laying around. Contact only happens at full droop and full turn. So they may not be absolutely necessary.