20x10 on a level

[dreww2001]

Yeah that body lift kit and this front level kit.
https://www.suspensionmaxx.com/store/product/SMX-GM725M

Thank you! Do you know of anyone who's done this and has pictures?

 

[01Konvict]

Thank you! Do you know of anyone who's done this and has pictures?

Not the total kit only seen a few 3" which look garbage but a 1.5 or 2" isn't bad because the steps still cover the frame. As far as level plenty have done it just not sure where pics are of the front bracket for auto ride. Think some guys in 15+ section did the front kit.

 

[dreww2001]

Not the total kit only seen a few 3" which look garbage but a 1.5 or 2" isn't bad because the steps still cover the frame. As far as level plenty have done it just not sure where pics are of the front bracket for auto ride. Think some guys in 15+ section did the front kit.

Thanks for your time!

 

[dreww2001]

Not the total kit only seen a few 3" which look garbage but a 1.5 or 2" isn't bad because the steps still cover the frame. As far as level plenty have done it just not sure where pics are of the front bracket for auto ride. Think some guys in 15+ section did the front kit.

On Zones website it says ill need to extend the ride height sensors are you sure i won't need anything to extend it with?

 

[01Konvict]

On Zones website it says ill need to extend the ride height sensors are you sure i won't need anything to extend it with?

That's for the front but if you get the other kit I posted it has the part to lengthen or should I say set the ride height sensor at correct height

 

[dreww2001]

That's for the front but if you get the other kit I posted it has the part to lengthen or should I say set the ride height sensor at correct height

That makes more sense thank you!

 

[ta07hoe]

So my plan was to buy some 20x9 Fuels, there is a guy who will sell me his XD Heists and they're a 20x10 im planning on running the Open Country R/T because thats what hes already got on them and they were what i was already planning to go with the size are 305/55R20 Q what would I need to do to get them to fit? Im going with the Rough Country 2" Level

They should fit with some trimming, if these guys run this then you should have no problem. I'm going with 20x10 -19 on a 2 inch level once winter is over

 

[ta07hoe]

 

[dreww2001]

They should fit with some trimming, if these guys run this then you should have no problem. I'm going with 20x10 -19 on a 2 inch level once winter is overView attachment 75954

Let me know how it goes!

 

[01Konvict]

I guarantee that both those yukons with x12 and x14 on level kits can turn lock to lock! Yeah they trimmed the front bumper but you would have to large norcal at then still rub. x10 should clear with minimal if any trim on the 4".