22" rubbing??

[scribble]

I have an 03 Denali Shorty that I just installed a a set of 22" wheels and I seem to be rubbing on right turns. I don't see any contact point when I was checking them out once installed. I don't have to be close to lock for it to start making noise.

I know everyone wants to know the size of the tire but I forgot to right it down.

Does anyone else have rubbing with 22"?

 

[mmeachem]

I'm not running 22"s but I am pretty good with wheels and tires. You should only have rubbing if you have 305/45/22 or Wider/Taller with a low offset wheel

If you have 305/40/22 or 275/45/22 or 285/45/22 you should have no problem unless you wheels are super low offset (deep dish wheels)

Hope this helps

-Mike

 

[scribble]

I got the wheels used and they are Giovanna Azaio 22 x 9.5 rims.

 

[grayhoe00]

unless the offset is something crazy or you have a huge tire i see no reason you should be rubbing..

 

[mmeachem]

unless the offset is something crazy or you have a huge tire i see no reason you should be rubbing..

Exactly or if he has a 315 or a high sidewall series tire

 

[grayhoe00]

i did when i first got my 22..but i am lowered...now i dont rub at all.

 

[scribble]

So I checked and the tires are 305/45/22 toyo prox

Sent from my SCH-R760 using Tapatalk 2

 

[mmeachem]

Yup that's why you might need to trim a little of the inner fender where it's rubbing

 

[scribble]

The thing that i find funny is my Speedo is dead on with these tires, my factory tires were off a bit.