275/70/18 E Nitto Ridge Grapplers: Thoughts?

[Undeserving]

Wanting to get these for my 2017 Sub. Factory it came with 265/65/18. I have a 2" front level installed. If my math is correct I would be going from 31.54" tall to 33.2" tall and 10.71" wide to 10.98" wide. Anyone have thoughts about whether or not I will have any rubbing issues or on the Ridge Grapplers in general?

 

[01Konvict]

They should work maybe a little plastic trim on wheel liner

 

[Undeserving]

I am suprised no one has an opinion on these particular tires. Also looking for a verified say on how a 33.2" tall and 10.9" wide tire will interface with my 2" lifted (leveled) front supension and wheel wells.

 

[cdubb79]

I don't think they will rub at all. But it will depend on your offset. I had to trim my wheel well for my 305/50/20. I went with 2.5 in the front and 1 in the back. I think im like -12 on the offset. Think i'm going to go up to a 305/55 or 295/60 tire next time.

 

[AZCreeker]

tons of posts on this section of the forum saying either no rub at all or just very minor trimming needed.
I say go for it and confirm back to us with pictures

 

[JoshO]

I can't comment on the size because I have 295/55R20 Ridge Grappler's on mine, but I love the tires. I was always a huge Goodyear Wrangler Duratrac fan, but the Ridge Grapplers blow them away in terms of both comfort on the road and being a lot less noisy. I never did any serious wheeling with either the Duratracs or Ridge Grapplers, but any mud/snow/sand I ever threw at them they both ate right up. The Ridge Grapplers look really good too.

 

[Undeserving]

I can't comment on the size because I have 295/55R20 Ridge Grappler's on mine, but I love the tires. I was always a huge Goodyear Wrangler Duratrac fan, but the Ridge Grapplers blow them away in terms of both comfort on the road and being a lot less noisy. I never did any serious wheeling with either the Duratracs or Ridge Grapplers, but any mud/snow/sand I ever threw at them they both ate right up. The Ridge Grapplers look really good too.

We're your 295 55 20 on a stock height vehicle? Yours would have been about .38" shorter and .78" wider then what I am wanting to go with. That isn't much difference so depending on what you had them mounted on and what wheels I should be good to go. My wheels are stock Chevrolet 18x8.5"

 

[JoshO]

Mine was leveled with the SuspensionMaxx 2.5" front and 1.5" rear kit on 20x9 KMC XD Series Monster wheels, +18 offset.

 

[JennaBear]

Just put 33x12.5x22 Ridge Grapplers on mine, no rubbing with 1.5" leveling kit.

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[HiHoeSilver]

Just put 33x12.5x22 Ridge Grapplers on mine, no rubbing with 1.5" leveling kit.

Sent from my SAMSUNG-SM-G890A using Tapatalk

As always..... Pics or it didn't happen, lol.