3.5 RC lift on 2011 Suburban????

[livinglife007]

Looking to lift my 2011 Suburban using the 3.5 RC with new uppers along with
Kanati Trail Hog LT275/60R20. I'm thinking of using the stock wheels which I believe is a pos 31 or 32 offset can't remember. Will running the stock wheels create a problem, or should I get a wheel with a pos 18 offset.
Really don't want wheels and tires to hang out much from the fender and would like to no have to cut anything if possible.

 

[DWSmoot]

This should be moved to the section covering your year model, you will get better response.

 

[Bill 1960]

If that’s the lift I think it is, I looked at it too. Decided against it because the diff only dropped a little bit and the CV’s end up stretched down. Which is great for clearance but not so good for ride quality and axle durability.

The original wheels are +31. I believe in the downloadable installation instructions there’s some recommendations on backspace and wheel/ tire sizes.

 

[livinglife007]

This should be moved to the section covering your year model, you will get better response.

New to this group how can I move it?

 

[DWSmoot]

You can do a new post in correct section. Moderator will be able to move or delete it here.

 

[livinglife007]

You can do a new post in correct section. Moderator will be able to move or delete it here.

What would the correct section be. Sorry for all the questions.

 

[wjburken]

What would the correct section be. Sorry for all the questions.

Let’s get a mod or admin to move.

@soulsea

 

[soulsea]

Done.