35 x 12.50's on 00-06 Yukon/Tahoe with key's and spacers?

[Sir-Lancelot]

I did search, but did not find anyone with this set up.

I have seen 2 of these now on the road. A Tahoe and A Sierra. 20's with 35 x 12.50 on each. They do not look too stuffed and I really want to do this to my Yukon. Very seldom do I go off road, I mainly just want the look.
Anyone here done this and how does it ride?

I was told as long as you keep the factory offset on the rims and trim the front a little bit you are good to go.

Anyone?
Thanks.

 

[Sir-Lancelot]

No one?

Guess I will be the Guinea pig next month then. lol
Black 20" XD Monsters and 35 x 12.50 Cooper STT's.

 

[yukondoit]

Keep us updated man, If needed you can always trim. I think you should be alright..

 

[208motors]

Sir-Lanc my neighbor has a yukon xl with the 33-12.5/18 on it. He has a lot of positive backspace and only rubbs a little on the frame in front when at full lock. I would like to see pictures of yours when your done. I'm considering the same wheel/tire as you but only if keys will clear it entirely. My vote is go for it and get those pics up as soon as you can.

 

[Sir-Lancelot]

Hey thanks for the replies.
There is a car dealer in my area that is doing it to some of their trucks so I would say if it was a big problem they would not be doing it. He had to trim the bottom plastic piece on the front bumper, but thats not a big deal to me. He said as long as I went with the factory rim offset and width, I can fit 35 x 12.5 x 20's with no rubbing on any of the 00 and up. 2" keys and spacers only and it looks badass! Does not look stuffed at all and side by side with a new factory truck it sits a good bit higher.

I think they look great on there and I am going to do it next month after I get my commission check. I will put up some pictures of my Yukon XL and my impression of the set up for you guys. I am going with a 20" black Rockstars or Monsters with the 35" Cooper STT's. I think this will look good against the Summit white and the taller stance will help with how long the XL is, IMO.

 

[AquinoSteven]

Keep up updated, should look nasty but plan on crankin with 35s. I hope you went with 2"s spacers too

 

[Sir-Lancelot]

Keep up updated, should look nasty but plan on crankin with 35s. I hope you went with 2"s spacers too

Yea Ima go with 2" F&R and some turns on the torsion bars to level it out.

 

[208motors]

Any upward progress??? Pics please!!!

 

[Max]

You'll need lots of positive offset on a 2x8.5" wheel to clear a 35, thankfully the coopers will only measure 34.5 but I think you're gonna have to trim a good bit to clear them effectively. Be sure to post pics when you get everything installed.

 

[Sir-Lancelot]

I am going to find out soon enough. lol
Will be getting my bonus from work in a couple weeks, so then I just need to pick a day to be without my truck.

From what I have seen, the only thing they are trimming is the black plastic piece on the front bumper. Looks sick.

I will put up some pics and my thoughts when it's done.