pamelapanian
TYF Newbie
- Joined
- May 1, 2024
- Posts
- 1
- Reaction score
- 0
when I put it in 4 low the light blinks then goes off???? Uggh...why?? Anyone can help with same experience ot fix this.is it broken?
4 Low blinking light
- Thread starter pamelapanian
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
DirtDigler
Full Access Member
- Joined
- Jan 17, 2021
- Posts
- 143
- Reaction score
- 118
Is it trans in Neutral when you select 4L?
if you are doing the procedure correctly and still getting a blinking light then it's possible the encoder motor is not engaging properly. replacements run about $160 last time I looked.
there used to be a guy selling the part to fix it, requires tearing the motor down.
"sometimes" the dash switch goes bad but I think the symptoms are different.
there used to be a guy selling the part to fix it, requires tearing the motor down.
"sometimes" the dash switch goes bad but I think the symptoms are different.
Might be useful to know what year, make, and model you're driving.
However, your owner's manual (found online at https://www.chevrolet.com/support/vehicle/manuals-guides; gm site will be similar, depending on what you have) will have the specific procedure to select 4LO on your vehicle. Things like having the tranny in neutral, the vehicle under 3mph, etc.
If, after that, you still have trouble, check back in. Also let us know if you got it to go.
However, your owner's manual (found online at https://www.chevrolet.com/support/vehicle/manuals-guides; gm site will be similar, depending on what you have) will have the specific procedure to select 4LO on your vehicle. Things like having the tranny in neutral, the vehicle under 3mph, etc.
If, after that, you still have trouble, check back in. Also let us know if you got it to go.
noodlesandsam2
Member
What is the reason you are engaging 4 Lo? that is rare
