i have a 95 tahoe 2dr 4x4. i wanna lift it and to my experience 14 bolt rear and d60 front. i was thinkin bout goin the stronger full float(with 4.88 or 5.13 ring and pinion dependin on how big of tires). i wanna go bout 15 inches since i have a body lift i just need 12" suspension so i was just goin to buy the bigger springs and shocks. anybody have any issues i should know bout this swap? and i would love pics with this type of lift. any advice welcome. i just wanna know what im goin to be up against since i've never lifted a tahoe.
95 tahoe
- Thread starter bubba91
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
seriously? How much lift knowledge do you have? A complete SAS might be a little bit out of your grasp. You are correct on the 14/60 though. but that is a drop in the bucket considering what else needs to be done. I am no expert on this, but you need to put a lot of thought, money and time to do this right.
