99 Tahoe Blower Motor Issue

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

houston39

TYF Newbie
Joined
Nov 21, 2011
Posts
3
Reaction score
0
Hello,

I have a 99 Tahoe, and the blower motor only blows on the high speed setting. I replaced the Blower Resistor and it didn't do the trick. It will still blow high even when the Blower Resistor is not hooked up.

What is a bit strange is that when the blower is off, I will have to push on the knob that controls the speed to get it to work (still only blows on high). Any ideas or thoughts would be greatly appreciated!

George
 

SunlitComet

OBS Jedi-Do Good
Joined
Sep 30, 2010
Posts
16,206
Reaction score
188
Location
unknown at this time.
That probably means the fan switch itself is the culprit if pushing on the knob does something for it. If you find that only the high still work while only in big you have a wire loose somewhere or the hi speed relay is partially defective.
 
Last edited:
OP
OP
H

houston39

TYF Newbie
Joined
Nov 21, 2011
Posts
3
Reaction score
0
Fixed!

That was it - I replaced the fan blower switch and it works. Thanks again.
 
Top