01TX_Tahoe
Semper Fi
Has anyone tried swapping the A/C control module from an 01 tahoe with one from an 03 or up? Will that work or are they just too different and hard to mess with?
A/C Control module swap
- Thread starter 01TX_Tahoe
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
danniboi
Member
- Joined
- Apr 18, 2013
- Posts
- 71
- Reaction score
- 0
I've wondered that too since I am doing the double din conversion. I believe I read somewhere that the only way possible would be to have a wiring schematic for both cars for the AC controls.
OP
OP
01TX_Tahoe
Semper Fi
My brother in law has an 03 Chevy, maybe I'll try it out and see what happens
Sent from my SGH-T999 using Tapatalk
Sent from my SGH-T999 using Tapatalk
From what I recall it won't work without major rewiring.
OP
OP
01TX_Tahoe
Semper Fi
That sucks. Guess I'll have to try something else then. Thanks for the replies
Sent from my Xoom using Tapatalk
Sent from my Xoom using Tapatalk
SLCHOE
ASE Master Certified + (L1)
Pretty sure the 03 and up communicate on the Class 2 data bus. If so it wont work.
x2
The 03+ is totally different wiring. Same goes for the manual to automatic controls. Completely different. Needs new wires/harness's etc and would be easier to sell your truck and get a different one rather than swap out the entire trucks wiring/computers/etc
OP
OP
01TX_Tahoe
Semper Fi
Yeah I don't see that happening anytime soon. Not with my son graduating and going to Texas A&M
Sent from my Xoom using Tapatalk
Sent from my Xoom using Tapatalk
Similar threads
