A little something..

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Usdmskyline20

Member
Joined
Sep 22, 2016
Posts
49
Reaction score
67
Decided to drop some sounds in the wife’s ride. Box is built and ported to spec. Install by my buddy Chris @ The Garage Orlando

Equipment:
Phoenix Gold Tantrum 500.2
Phoenix Gold Tantrum 400.4
Phoenix Gold SX110D4 x2
Audio Control LC6i
Audio Control LC2
All Stinger Wiring.

Will post more pix once wrapped.

bfb2fc995ab72c17d252aa969318502a.jpg54b85a8846f39c2b09ca1937578b9110.jpge4a716ea77f72d7f07e9c700108c1ab8.jpg


2011 Dodge Ram 1500 Big Horn
2017 Chevy Tahoe LT
Sent from my iPhone using Tapatalk
 

Textilet

TYF Newbie
Joined
Oct 7, 2017
Posts
5
Reaction score
1
Did you keep the stock head unit and just amp the stock speakers? How did that come out?
 
OP
OP
Usdmskyline20

Usdmskyline20

Member
Joined
Sep 22, 2016
Posts
49
Reaction score
67
Did you keep the stock head unit and just amp the stock speakers? How did that come out?

Yes, that’s what I did. It came out great. Those Bose speakers are pretty impressive with a little more power to them. I threw in some old component crossovers to separate the mids/high.


2011 Dodge Ram 1500 Big Horn
2017 Chevy Tahoe LT
Sent from my iPhone using Tapatalk
 

Unit171

Full Access Member
Joined
Sep 17, 2017
Posts
105
Reaction score
30
Location
NC
I just installed a 750 mono for a 12” dvc P3 sub. I used the Signal on the amp at the driver side behind the third row seat.
For some reason mine hits hard for a short period and then cuts off. Amp still blue light(non protect)

So my question to you is where did you pull your signals for your LOC and did you do anything to the stock headunit?

I like the seat removal you did. I’ll never get away with that when I have to put my dogs crate in the back(85 pdr)
 
OP
OP
Usdmskyline20

Usdmskyline20

Member
Joined
Sep 22, 2016
Posts
49
Reaction score
67
I just installed a 750 mono for a 12” dvc P3 sub. I used the Signal on the amp at the driver side behind the third row seat.
For some reason mine hits hard for a short period and then cuts off. Amp still blue light(non protect)

So my question to you is where did you pull your signals for your LOC and did you do anything to the stock headunit?

I like the seat removal you did. I’ll never get away with that when I have to put my dogs crate in the back(85 pdr)


The signal for the Audio Control LC2 and LC6 were taken from the outputs on the Bose amp located behind the jack. Thankfully I didn’t need to remove or do anything with the stock deck. All connections were made were the Bose amp is located.

Are you sure the wires you tied your LOC too are for the factory sub?


2011 Dodge Ram 1500 Big Horn
2017 Chevy Tahoe LT
Sent from my iPhone using Tapatalk
 
Last edited:

Forum statistics

Threads
132,760
Posts
1,873,763
Members
97,592
Latest member
shadowid60
Top