Adding Express down/up aka Auto up windows to Yukon

[derfman00]

I have a 2014 Denali. I'm wanting to add auto up / aka express up windows in the front. I want to make sure it supports anti pinch.

So far I've read that I need the switches from the Escalade

Driver's switch panel - 20835555

Motors to support the anti-pinch

Driver - 11M184
Passenger - 11M184

Will the motors bolt up to the existing window assemblies or would I need the whole assembly?



I have also looked into an aftermarket module

https://www.autoloc.com/catalog/pro...-Touch-Up-And-Down-Window-Unit---(Up-AND-Down

This seems intriguing as it's a lot cheaper and uses a load sensor to act as anti pinch.


Any opinions? Has anyone done either of these things? I've seen discussions, but no results / updates


Thank you again!

 

[itsbo1313]

I want to do this as well.

 

[HACK BLOCK]

I think aftermarket would be just fine

 

[derfman00]

Have a friend who is a certified iinstaller. He said the module won't work because of the factory auto down... Anyone actually do this on their own truck?

 

[HACK BLOCK]

Have a friend who is a certified iinstaller. He said the module won't work because of the factory auto down... Anyone actually do this on their own truck?

did he explain why? I'm interested in having auto up

 

[derfman00]

did he explain why? I'm interested in having auto up

I didn't ask. I haven't actually seen this work on anyone's vehicle. That's why I asked here if anyone had personally done it

 

[swathdiver]

Have a friend who is a certified iinstaller. He said the module won't work because of the factory auto down... Anyone actually do this on their own truck?

Fred, which module(s) controls the auto up feature? Are those motors you listed earlier different from our trucks without it? My thinking is that this is basically a programming feature in a module or two that can be done with access to TIS2WEB and a Tech-2.

 

[derfman00]

Fred, which module(s) controls the auto up feature? Are those motors you listed earlier different from our trucks without it? My thinking is that this is basically a programming feature in a module or two that can be done with access to TIS2WEB and a Tech-2.

He said the 535t won't work. He didn't comment on the escalade swap. That should work, it just costs more.

Personally, my next mod is a Black Bear tune, until then, this research is on hold. I'll be scanning eBay though in case a deal comes up.

 

[swathdiver]

He said the 535t won't work. He didn't comment on the escalade swap. That should work, it just costs more.

Personally, my next mod is a Black Bear tune, until then, this research is on hold. I'll be scanning eBay though in case a deal comes up.

Yeah, the tune is more profitable and fun than holding a switch for 4 or 5 seconds!