Adding power folding mirrors

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

jdj71

Member
Joined
Jun 22, 2011
Posts
78
Reaction score
6
Location
Ontario Canada
Hey everyone
I’ve tried searching this topic
I’m sure it’s on here somewhere

anyone have a link for adding power folding mirrors to my manual fold SLT?
thx
Merry Christmas!
 

Tonyrodz

Resident Resident
Joined
Feb 16, 2012
Posts
31,616
Reaction score
47,136
Location
Central Jersey
I don't have the complete answer for you, but I do have a piece to the puzzle---Besides the pwr fold mirrors, you'll also need the proper mirror switch. Don't buy a new switch from GM--you'll have to get it programmed to work. Get one from a jy. It'll work fine, and you won't need to program it.
 

steve671

Member
Joined
Dec 5, 2021
Posts
30
Reaction score
25
Location
CA Bay Area
Hey everyone
I’ve tried searching this topic
I’m sure it’s on here somewhere

anyone have a link for adding power folding mirrors to my manual fold SLT?
thx
Merry Christmas!
Did you get this figured out? I am hoping to do the same on mine.
 

Shackman7878

Full Access Member
Joined
Oct 17, 2020
Posts
140
Reaction score
174
Location
San Bernardino
I have done this project on my Tahoe and here is the process and information on installing my mirrors and repairs.
So you have to buy the folding mirrors simple to find they have 2 connectors also has a sticker saying DL3 (you will need the door harness for side mirror turn signals to work, or lazy way is to run a turn single wire to each mirror and find a ground.)

You can go 2 ways.


1. Buy new window switches BOTH driver and passenger and program them to a Vin number that has power folding mirrors.
Part # Driver - 20835553, Old numbers 15906881, 15093440, 20877336, 25783951 (there is a couple others but cant find them)
Part # Passenger - 20835554, 15093445 Old numbers 20877339 (there is a couple others but cant find them)

2. Buy used switches from a power folding mirrors SUV with RPO code DL3. Make sure to get both if buying from a junk yard ask them to send you the RPO code list in the glove box. You can PM me the Vin and I can check it for you if I have time (Holidays). Driver side is easy to spot if it has power folding mirrors. The hard part is finding the passenger side it could have the part numbers listed but be careful they can be used but not programmed for folding mirrors. I would check Ads that list the vin numbers or RPO code sheet or email and ask.

Years and Models You can get the switches from
CHEVROLETAVALANCHE2007-2013
CHEVROLETCHEYENNE2009-2013
CHEVROLETSILVERADO 15002007-2014
CHEVROLETSILVERADO 25002007-2015
CHEVROLETSILVERADO 35002007-2015
CHEVROLETSUBURBAN2014
CHEVROLETSUBURBAN 15002007-2014
CHEVROLETSUBURBAN 25002007-2013
CHEVROLETTAHOE2007-2014
CHEVROLETTRAVERSE2009-2010
GMCSIERRA 15002007-2014
GMCSIERRA 25002007-2014
GMCSIERRA 35002007-2014
GMCSIERRA DENALI2010
GMCYUKON2007-2014
GMCYUKON XL 15002007-2014
GMCYUKON XL 25002007-2013

DL3 - OSRV MIRROR W/DRIVER SIDE AUTO DIMMING, PWR FOLD & ADJ, HEAT, TURN SIGNAL (REPLACES STD/PKG MIRROR)

Also it is very common for the plastic gears on the power folding mirrors to break here is a website that selling the gears but in brass or ready to go motors. (recommend the Pre-Attached Gears + 2 Motors)
 

Attachments

  • s-l1600 (2).jpg
    s-l1600 (2).jpg
    263 KB · Views: 14
  • RPO Sticker.JPG
    RPO Sticker.JPG
    215.6 KB · Views: 13
OP
OP
jdj71

jdj71

Member
Joined
Jun 22, 2011
Posts
78
Reaction score
6
Location
Ontario Canada
I have done this project on my Tahoe and here is the process and information on installing my mirrors and repairs.
So you have to buy the folding mirrors simple to find they have 2 connectors also has a sticker saying DL3 (you will need the door harness for side mirror turn signals to work, or lazy way is to run a turn single wire to each mirror and find a ground.)

You can go 2 ways.

1. Buy new window switches BOTH driver and passenger and program them to a Vin number that has power folding mirrors.
Part # Driver - 20835553, Old numbers 15906881, 15093440, 20877336, 25783951 (there is a couple others but cant find them)
Part # Passenger - 20835554, 15093445 Old numbers 20877339 (there is a couple others but cant find them)

2. Buy used switches from a power folding mirrors SUV with RPO code DL3. Make sure to get both if buying from a junk yard ask them to send you the RPO code list in the glove box. You can PM me the Vin and I can check it for you if I have time (Holidays). Driver side is easy to spot if it has power folding mirrors. The hard part is finding the passenger side it could have the part numbers listed but be careful they can be used but not programmed for folding mirrors. I would check Ads that list the vin numbers or RPO code sheet or email and ask.

Years and Models You can get the switches from
CHEVROLETAVALANCHE2007-2013
CHEVROLETCHEYENNE2009-2013
CHEVROLETSILVERADO 15002007-2014
CHEVROLETSILVERADO 25002007-2015
CHEVROLETSILVERADO 35002007-2015
CHEVROLETSUBURBAN2014
CHEVROLETSUBURBAN 15002007-2014
CHEVROLETSUBURBAN 25002007-2013
CHEVROLETTAHOE2007-2014
CHEVROLETTRAVERSE2009-2010
GMCSIERRA 15002007-2014
GMCSIERRA 25002007-2014
GMCSIERRA 35002007-2014
GMCSIERRA DENALI2010
GMCYUKON2007-2014
GMCYUKON XL 15002007-2014
GMCYUKON XL 25002007-2013

DL3 - OSRV MIRROR W/DRIVER SIDE AUTO DIMMING, PWR FOLD & ADJ, HEAT, TURN SIGNAL (REPLACES STD/PKG MIRROR)

Also it is very common for the plastic gears on the power folding mirrors to break here is a website that selling the gears but in brass or ready to go motors. (recommend the Pre-Attached Gears + 2 Motors)
Wow

That’s an incredible breakdown of the steps involved

I really appreciate the time you put into replying
Thx so much!!!
 
OP
OP
jdj71

jdj71

Member
Joined
Jun 22, 2011
Posts
78
Reaction score
6
Location
Ontario Canada
Hey everyone
I’ve tried searching this topic
I’m sure it’s on here somewhere

anyone have a link for adding power folding mirrors to my manual fold SLT?
thx
Merry Christmas!
Hey guys
I added the pwr fold mirrors

They work!
Indicators work
Drivers side mirror struggles to adjust
And I’ve Got No puddles

Anybody might have an idea why the puddles aren’t working?
*new bulbs inserted
 
OP
OP
jdj71

jdj71

Member
Joined
Jun 22, 2011
Posts
78
Reaction score
6
Location
Ontario Canada
I have done this project on my Tahoe and here is the process and information on installing my mirrors and repairs.
So you have to buy the folding mirrors simple to find they have 2 connectors also has a sticker saying DL3 (you will need the door harness for side mirror turn signals to work, or lazy way is to run a turn single wire to each mirror and find a ground.)

You can go 2 ways.

1. Buy new window switches BOTH driver and passenger and program them to a Vin number that has power folding mirrors.
Part # Driver - 20835553, Old numbers 15906881, 15093440, 20877336, 25783951 (there is a couple others but cant find them)
Part # Passenger - 20835554, 15093445 Old numbers 20877339 (there is a couple others but cant find them)

2. Buy used switches from a power folding mirrors SUV with RPO code DL3. Make sure to get both if buying from a junk yard ask them to send you the RPO code list in the glove box. You can PM me the Vin and I can check it for you if I have time (Holidays). Driver side is easy to spot if it has power folding mirrors. The hard part is finding the passenger side it could have the part numbers listed but be careful they can be used but not programmed for folding mirrors. I would check Ads that list the vin numbers or RPO code sheet or email and ask.

Years and Models You can get the switches from
CHEVROLETAVALANCHE2007-2013
CHEVROLETCHEYENNE2009-2013
CHEVROLETSILVERADO 15002007-2014
CHEVROLETSILVERADO 25002007-2015
CHEVROLETSILVERADO 35002007-2015
CHEVROLETSUBURBAN2014
CHEVROLETSUBURBAN 15002007-2014
CHEVROLETSUBURBAN 25002007-2013
CHEVROLETTAHOE2007-2014
CHEVROLETTRAVERSE2009-2010
GMCSIERRA 15002007-2014
GMCSIERRA 25002007-2014
GMCSIERRA 35002007-2014
GMCSIERRA DENALI2010
GMCYUKON2007-2014
GMCYUKON XL 15002007-2014
GMCYUKON XL 25002007-2013

DL3 - OSRV MIRROR W/DRIVER SIDE AUTO DIMMING, PWR FOLD & ADJ, HEAT, TURN SIGNAL (REPLACES STD/PKG MIRROR)

Also it is very common for the plastic gears on the power folding mirrors to break here is a website that selling the gears but in brass or ready to go motors. (recommend the Pre-Attached Gears + 2 Motors)
Hi there
I just installed the mirrors on my truck
I installed the mirrors on an 07 SLT that came with the standard non fold
No puddle

The mirrors I attached have the puddle lights
But They both aren’t functioning
New bulbs in each

Is this a programming issue?

Kindve puzzled as to why they don’t work

Any thoughts?
Thx
 

Tonyrodz

Resident Resident
Joined
Feb 16, 2012
Posts
31,616
Reaction score
47,136
Location
Central Jersey
Hi there
I just installed the mirrors on my truck
I installed the mirrors on an 07 SLT that came with the standard non fold
No puddle

The mirrors I attached have the puddle lights
But They both aren’t functioning
New bulbs in each

Is this a programming issue?

Kindve puzzled as to why they don’t work

Any thoughts?
Thx
On my 03 they come on at night using the fob to lock/unlock the truck.
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
26,234
Reaction score
39,317
Location
Stockton, Ca.
Hi there
I just installed the mirrors on my truck
I installed the mirrors on an 07 SLT that came with the standard non fold
No puddle

The mirrors I attached have the puddle lights
But They both aren’t functioning
New bulbs in each

Is this a programming issue?

Kindve puzzled as to why they don’t work

Any thoughts?
Thx
Like tony said, they only work at night with oem keyfob, you can test them in daylight by covering the sun sensor on the dash with a jacket or something so it thinks it is nightime.
I wired mine to work with the interior lights because I use a aftermarket alarm keyfob and the interior lights work with the alarm.
 

Shackman7878

Full Access Member
Joined
Oct 17, 2020
Posts
140
Reaction score
174
Location
San Bernardino
Hi there
I just installed the mirrors on my truck
I installed the mirrors on an 07 SLT that came with the standard non fold
No puddle

The mirrors I attached have the puddle lights
But They both aren’t functioning
New bulbs in each

Is this a programming issue?

Kindve puzzled as to why they don’t work

Any thoughts?
Thx
You are going to have to trace the wires to the puddle lights and wire then to switch, or do the daytime running circuit.
 

Forum statistics

Threads
132,360
Posts
1,866,637
Members
96,982
Latest member
RacerRod
Top