juan84
Full Access Member
I tried that on mine it would turn on but cut off so I just ran a remote wire to the upfiter plug location along with power and ground this was on my nnbs
Sent from my SM-G920T using Tapatalk
Adding subwoofer. Best way to tap audio signal?
- Thread starter yesac
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Sent from my SM-G920T using Tapatalk
Qlassic418
Member
- Joined
- Apr 20, 2017
- Posts
- 73
- Reaction score
- 14
Mine is working perfectly.
fozzi58
Full Access Member
Sorry to have to revive a dead thread but I've been searching the forum looking for an answer and can't find one.
Read thru the thread I am posting in now and also: https://www.tahoeyukonforum.com/thr...-oem-kicker-200w-powered-subwoofer-kit.93525/
'17 burb LS - no amp. There is only 1 module at the back of the truck. Also 1 plug. I used a test light and tried hitting each wire with key on and off and got nothing. The diagram in this thread shows an 8 pin plug but mine is 14 or so it seems.
From this thread or the "Kicker Kit" thread I have been looking for a blue/brown wire. The instructions form the "Kicker" thread talks about wiring for those with the factory Bose amp. But I don't have one to work with. I had originally thought the plug in the pics below was that factory amp harness but I guess its not.
Any help would be appreciated cause I need to hook up my Scoche LOC90 for high to low convert. I just built a custom fiberglass enclosure for a Skar shallow 12 and a Skar amp. Need to button up the wiring for the amp and then just run power and I am good to go. Thanks in advance.
Read thru the thread I am posting in now and also: https://www.tahoeyukonforum.com/thr...-oem-kicker-200w-powered-subwoofer-kit.93525/
'17 burb LS - no amp. There is only 1 module at the back of the truck. Also 1 plug. I used a test light and tried hitting each wire with key on and off and got nothing. The diagram in this thread shows an 8 pin plug but mine is 14 or so it seems.
From this thread or the "Kicker Kit" thread I have been looking for a blue/brown wire. The instructions form the "Kicker" thread talks about wiring for those with the factory Bose amp. But I don't have one to work with. I had originally thought the plug in the pics below was that factory amp harness but I guess its not.
Any help would be appreciated cause I need to hook up my Scoche LOC90 for high to low convert. I just built a custom fiberglass enclosure for a Skar shallow 12 and a Skar amp. Need to button up the wiring for the amp and then just run power and I am good to go. Thanks in advance.
hcvone
Full Access Member
I hooked up NavTV M650 from the stock sound system to my Audison 5 channel amp then to the JL sub replacing the stock Bose sub, couldn't believe the bass difference, thought I would be having to add the dreaded boxes, but not with this sub.
