AFM

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

dmad1

Member
Joined
Jan 2, 2018
Posts
86
Reaction score
29
For the time being till you get it tuned unplug the sensor wire in the brake booster vacuum line. It will prevent it from going into 4cyl mode. You will have a check engine light on because it can't find the sensor, but it doesn't cause any Drivability, issues. That sensor is what tells the truck that it is okay. And has enough vacuum to go into 4 cylinder mode. Then when you go to get it turned off in a tune you can plug it back in. Also if you change out the cam and lifters then you can delete the vacuum pump which also has it's downfalls because you won't need it anymore after you eliminate the AFM.
Would you mind sending a pic of where the sensor wire plugs into the booster?
 

dmad1

Member
Joined
Jan 2, 2018
Posts
86
Reaction score
29
Great pics. Thanks a million!
As a footnote, when it misfires and or sets a code, does your transmission act up? Local shop wants to replace lifters and tranny. Huge $. :(
 

buckwild27

Full Access Member
Joined
Feb 7, 2024
Posts
223
Reaction score
446
Great pics. Thanks a million!
As a footnote, when it misfires and or sets a code, does your transmission act up? Local shop wants to replace lifters and tranny. Huge $. :(
I can’t answer that I've not had that problem.
 

Forum statistics

Threads
132,748
Posts
1,873,517
Members
97,573
Latest member
Roblusk

Latest posts

Top