Aftermarket wheels

[tabraha]

2mph, I’d let that slide!

 

[Dan H]

I've been trying to decide on an aftermarket wheel for my 2021 GMC Yukon for 2.5 months and came up with this Fuel 22" x 10" +10 chrome wheels with 285/50/22 Nitto terra grappler G2's.

 

[B520044]

Sweet! This is what I plan to do; same wheels. Where did you get them? How is the quality? No issues with balancing..etc..?

Has anyone had issues with the black replica wheels? For instance with the black finish; during or after tire install and any issues with balancing? It seems that the process of swapping wheels and tires would scratch them up.

I'm trying to decide between these or OEM wheels.

Thanks,

 

[DWSmoot]

Has anyone had issues with the black replica wheels? For instance with the black finish; during or after tire install and any issues with balancing? It seems that the process of swapping wheels and tires would scratch them up.

I'm trying to decide between these or OEM wheels.

Thanks,

I have run them on last vehicle and current. No issues whatsoever. Balanced out great. OE Wheels LLC if they have what you are looking for.

 

[d0wnShifT]

Posted a bunch more pics in my vehicle specific thread but I put on Fuel Rebel 18x9 +1 offset rims with 275/70R18 Ridge Grapplers this weekend. Really makes the AT4 package look substantial.

View attachment 268266
View attachment 268267
View attachment 268268

So for those who were curious 18's will clear the calipers easily. Just to my eyeball you may be able to go 17 but 18's are perfect for a nice balanced offroad tire combo with plenty of sidewall room to air down when desired.

Can you take a pic from the front down the side of the vehicle so i can see how much the wheel is in the wheel well. Trying to see what that backspacing looks like.

Looks great and this is the look i'm going for with my tahoe.

 

[tabraha]

Can you take a pic from the front down the side of the vehicle so i can see how much the wheel is in the wheel well. Trying to see what that backspacing looks like.

Looks great and this is the look i'm going for with my tahoe.

I took a few as it looks really different from slightly different angles. Hard to describe. I would describe the sidewall as dead on flush with the widest part of the fender but from slightly away from the side it looks stanced.

 

[d0wnShifT]

I took a few as it looks really different from slightly different angles. Hard to describe. I would describe the sidewall as dead on flush with the widest part of the fender but from slightly away from the side it looks stanced.
View attachment 272675 View attachment 272676 View attachment 272677 View attachment 272678

Thanks! Looks like a perfect offset.

 

[Toasty]

Saw this on Facebook this weekend

 

[Leon00000]

I got Mayhem warrior 8015-2994mb18, 18mm offset, 20inch for winter
No rubbering, and perfect for factory TPMS and center bore

View attachment 273600

 

[DaAlphaSupreme]

Here is my escalade (lowered on 26's)
View attachment 267910 View attachment 267910 View attachment 267911 View attachment 267912

How is the ride quality compared to factory wheels? How's the bumps on rough streets & the highway ride.

Thanks for your reply in advance. I have a 2021 Denali & I am trying to get some wheels for it.