Air ride Edgy Mods question

[CCPLuvr]

Today our new AT4 is going in for wheels, tires and Edgy Mods links installed. I've got a question regarding increased ride heights for those that have done this. Will we see an increase of up to 2.5" in the lowered and normal ride height positions? I'm assuming we should measure the vehicle prior to and after installation in the park position, and that should be the same difference we'll see in Normal ride height? Any insight will be helpful. Thanks.

 

[KMeloney]

Did you already get your answer since installing the links?

 

[CCPLuvr]

Yes, but not till after they were installed. I've got to remove them and readjust, they're too low right now.
John from Edgy Mods said to disable the entry position so the suspension is always at Normal ride height prior to installation.
Once I get it corrected I'll post some pics.
Thanks for asking!

 

[PMB 73]

Yes, but not till after they were installed. I've got to remove them and readjust, they're too low right now.
John from Edgy Mods said to disable the entry position so the suspension is always at Normal ride height prior to installation.
Once I get it corrected I'll post some pics.
Thanks for asking!

Have you installed the Edgy Mod links? What size tire did you go with? Also, how do you like the ride after with the EM links added?

 

[CCPLuvr]

I didn't keep the overall adjusted link lengths used on my AT4. The ride is a little firmer than stock but it's still smooth driving it.

 

[CCPLuvr]

Here's a couple links after this was finished:

2024 AT4 Wheel Liner Trimming

My wife and I purchased a 2024 Yukon XL AT4 in Nov, 2024. This forum was greatly helpful in deciding wheel specs to achieve the desired look we wanted. We installed AT4W 35x11.5 tires on Fuel 20x9 20mm offset wheels. This truck is an air ride model so we purchased links from www.edgymods.com...

www.tahoeyukonforum.com

Yukon XL AT4 Lifted

About 2 years ago my wife started sending me screenshots of lifted Yukon and Escalades from Hurst Autoplex's IG account. We were into another vehicle with issues and couldn't just change course till November. We did purchase a '24 Yukon XL AT4 in November and started planning the mods with...

www.tahoeyukonforum.com

 

[CCPLuvr]

The alignment was WAY out after adjusting the ride height. Getting it properly aligned helped the ride as well.

 

[PMB 73]

Perfect, thank you for replying. Looks great! I would have to say my biggest concern is how it drives afterwards. Smooth is good! Have you taken it off road or tried to test the air bags?

 

[CCPLuvr]

Not yet but that is the plan.

 

[PMB 73]

How about towing. Have you towed anything?