Mattsred03
TYF Newbie
- Joined
- Mar 16, 2017
- Posts
- 24
- Reaction score
- 28
I have an annoying problem on my 03 Tahoe.
Every day going to work (NAS Pensacola) I have to go over 2 speed bumps while I come in the gate. Every time I go over them slowly, (between 5 and 15 MPH, crawling over them makes no noise) I get a creaking sound out of my front suspension. When I leave base I have to go over one bump but I take that at 20MPH+ and it doesn't make a sound. All the ball joints are greased and the boots all look fine and no play in the wheel 6-12 or 3-9. Before I start throwing suspension parts at this thing, has anyone had this problem and what was the fix?
Its regrettably a 2WD front end. Any ideas? My first attempt at a fix will be control arms (lowers first) if nobody knows a more precise fix. I replaced the shocks already and that didn't fix it. And both hubs are new due to a rolling squeak or chirp last year, though I don't know how the hubs would make the noise like that for an up and down motion of the suspension.
So, and ideas or is replacing the lower control arms a good place to start?
Every day going to work (NAS Pensacola) I have to go over 2 speed bumps while I come in the gate. Every time I go over them slowly, (between 5 and 15 MPH, crawling over them makes no noise) I get a creaking sound out of my front suspension. When I leave base I have to go over one bump but I take that at 20MPH+ and it doesn't make a sound. All the ball joints are greased and the boots all look fine and no play in the wheel 6-12 or 3-9. Before I start throwing suspension parts at this thing, has anyone had this problem and what was the fix?
Its regrettably a 2WD front end. Any ideas? My first attempt at a fix will be control arms (lowers first) if nobody knows a more precise fix. I replaced the shocks already and that didn't fix it. And both hubs are new due to a rolling squeak or chirp last year, though I don't know how the hubs would make the noise like that for an up and down motion of the suspension.
So, and ideas or is replacing the lower control arms a good place to start?