Auto fog light option on Yukon

[KMeloney]

That’s great. Though I haven’t actually installed it yet, their radar detector mirror-wiring plug kit looks very well made.

 

[BobHolthaus]

His reverse light wiring for the Yukon was perfect quality and looked very OEM.

 

[KMeloney]

Any info yet on exactly how/where it will install? I've got the Autostop Eliminator behind the panel with the fog light button already... I'd imagine there's still room for another harness behind there, but... Thanks again.

 

[BobHolthaus]

I’ll email him and ask. That’s a great question.

 

[KMeloney]

FYI, I lied about the location of the Autostop Eliminator wiring. It went behind the panel ABOVE the 4-wheel drive selector and lights switch panel in my ‘23. Haven’t removed the panel with the fog light switch in it yet, but I’m assuming it’ll have to be removed for this harness.

 

[BobHolthaus]

Reply from Gen5DIY on where the harness would go:

It will connect inline at the passenger side headlight and then inline at the body to bumper harness which is located right above the passenger side fog light

 

[KMeloney]

Reply from Gen5DIY on where the harness would go:

It will connect inline at the passenger side headlight and then inline at the body to bumper harness which is located right above the passenger side fog light

Hmmm... Ok, think you could confirm one more thing (for now) for me/us? I've got the illuminated GMC grille emblem installed on my '23, and I believe that it gets power from and plugs into a harness near the DRIVER-side fog light... This foglights-on harness would definitely plug in on the passenger-side and not interfere with either the Chevy or GMC illuminated grille emblems' wiring/operation?

Thank you!

 

[BobHolthaus]

Hmmm... Ok, think you could confirm one more thing (for now) for me/us? I've got the illuminated GMC grille emblem installed on my '23, and I believe that it gets power from and plugs into a harness near the DRIVER-side fog light... This foglights-on harness would definitely plug in on the passenger-side and not interfere with either the Chevy or GMC illuminated grille emblems' wiring/operation?

Thank you!

Your reply has been sent

 

[Jimbo123]

I'd be interested in a kit

 

[BobHolthaus]

Hmmm... Ok, think you could confirm one more thing (for now) for me/us? I've got the illuminated GMC grille emblem installed on my '23, and I believe that it gets power from and plugs into a harness near the DRIVER-side fog light... This foglights-on harness would definitely plug in on the passenger-side and not interfere with either the Chevy or GMC illuminated grille emblems' wiring/operation?

Thank you!

His direct answer was: "It will not interfere". The email is [email protected] if you have any more questions. Thanks guys!