aux reverse lights

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

the big blue bus

Full Access Member
Joined
Apr 18, 2010
Posts
1,049
Reaction score
1
Location
richmond, va
well since my bumper is raised after bl i decided to mount my ligths on top the hitch because they got coverd in mud on the outside of bumper. i never did finish wiring them and have decided to wire them into the reverse lights for now and maybe later on add them to 3 way swtich. wheres the best place to tap into the reverse lights? and where shuld i mount the relay for them
 

SunlitComet

OBS Jedi-Do Good
Joined
Sep 30, 2010
Posts
16,206
Reaction score
188
Location
unknown at this time.
C103 LH rear of engine compartment at bulkhead.

LH rear of engine compartment under brake master cylinder.


Light green wire on the connector is between the back up switch and lights. great for a relay trigger and mount the relay in the same area
 
Last edited:

SunlitComet

OBS Jedi-Do Good
Joined
Sep 30, 2010
Posts
16,206
Reaction score
188
Location
unknown at this time.
If I read your first post correctly, by using that wire to trigger the relay coil while providing a seperate HAAT (Hot At All TImes)power connection from what ever your choice is, it would be ideal. When put in reverse relay is activated for supplemental lighting or you can add a separate switched coil trigger later on. Hell even throw another wire and the right type of switch in that mix that would add a disable function as well. It that what you kinda had in mind?
 

steamroller

Full Access Member
Joined
Apr 10, 2010
Posts
361
Reaction score
1
Location
The South
If yours has the tow package there might be a battery power source already ran back to the rear. Mine had an orange 10-12 gauge wire that ran along the driverside framerail in the harness. It was connected to one of the auxillary studs in the underhood fusebox.
 
OP
OP
the big blue bus

the big blue bus

Full Access Member
Joined
Apr 18, 2010
Posts
1,049
Reaction score
1
Location
richmond, va
ive got some sort of wires running abck but no plug. ill have to look when i get bakc into town. and yes i want torun it off a switch so i can turn it off or have them on when i want or when i put it in reverse. i need to find a 3 pos switch and a good place to mount it.
 

Forum statistics

Threads
133,339
Posts
1,883,890
Members
98,428
Latest member
mphotsprings
Top