OneofFew
Full Access Member
I'm not getting any alternator output. I started the car, noticed it was not charging, test drove and it started charging. After restarting engine, no charge. I wiggled wires, checked connections and grounds, no change. I unplugged the 4 prong, 2 wire connector at the back of the alternator (engine running) and I am getting 10.5v on the brown wire, 0.5v on the yellow. Plugged in, the brown wire puts out 1.3v. Battery voltage 12.4, 12v running.
Using a test light from B+ to the pin on the alternator that gets the brown wire, the test light lights up.
Does anyone know any other checks I can do to verify it is not a control circuit?
I do have a SUN Vat60 tester, but have never used it to check diodes.
Using a test light from B+ to the pin on the alternator that gets the brown wire, the test light lights up.
Does anyone know any other checks I can do to verify it is not a control circuit?
I do have a SUN Vat60 tester, but have never used it to check diodes.