BAMF Pri's 2005 Chevrolet Tahoe build thread

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
73impala

73impala

Full Access Member
Joined
Feb 13, 2012
Posts
542
Reaction score
740
Location
Margate, FL
Yup bumper plastics will all be color matched and then leave the chrome bumpers.
 

05Single

afraid of the dark
Joined
Feb 26, 2015
Posts
8,186
Reaction score
11,456
Well tahoe was overheating yesterday, thought maybe fans or water pump. Turns out it was neither just low on coolant, whew. Also purchased some JDMastar leds recently and replaced the old leds.

47242212302_633658a586_b.jpg2019-03-05_08-31-51 by James Pate, on Flickr
I took out all my Chinese leds and replaced them with hem astars. I also roll with my rear headrests down too lol
 
OP
OP
73impala

73impala

Full Access Member
Joined
Feb 13, 2012
Posts
542
Reaction score
740
Location
Margate, FL
I took out all my Chinese leds and replaced them with hem astars. I also roll with my rear headrests down too lol

Crazy what an improvement. yeah no reason for keeping them down just never put them back up lol
 
OP
OP
73impala

73impala

Full Access Member
Joined
Feb 13, 2012
Posts
542
Reaction score
740
Location
Margate, FL
Well truck decided it was going to overheat a little. Looked at it was a little low on coolant so I added some. Checked the radiator made sure the water pump was flowing water and it was. Turned the ac on made sure the fans were working and they came on. But after I topped it off the temps didn't get above operating temps and runs fine. But I did find that the truck is throwing a p0342 code so going to have to replace the camshaft position sensor behind the intake manifold.

BUT I also did get the escalade third brake light installed. Used double sided tape on the entire thing and it seems to be holding on pretty well. But only time will tell. I did however have to swap the two wires going from the factory plug into the actual light. Question though, with the running lights on the outside three lights on either side of the third brake are illuminated. Is that normal?

Also still waiting on the color matched end caps for the roof rack to come back from paint.

Anyways onto photos.

32447749837_806906ca90_b.jpgLRM_EXPORT_1664973653861244_20190315_184251997 by James Pate, on Flickr

32447750097_3b07f9095f_b.jpgLRM_EXPORT_1664957487654219_20190315_184235830 by James Pate, on Flickr

47336716582_9dbaac9742_b.jpgLRM_EXPORT_1664970792510672_20190315_184249135 by James Pate, on Flickr

40423984023_9435d1e2cd_b.jpgLRM_EXPORT_1664965448777601_20190315_184243792 by James Pate, on Flickr

32447750017_43c746aec1_b.jpgLRM_EXPORT_1664968175238017_20190315_184246518 by James Pate, on Flickr
 

Fosscore

Full Access Member
Joined
Apr 16, 2014
Posts
10,519
Reaction score
18,256
That Esky 3rd looks good. Slowly growing on me.
 

Forum statistics

Threads
132,312
Posts
1,865,768
Members
96,904
Latest member
Nix409

Latest posts

Top