Bedlined Rockers & Bumpers

[autolover3]

So a couple months ago I decided to Herculine my rocker panels and do a little customizing to the bumpers.

Here is my Yukon when I first got it

Progress

Started with removing the bumpers

Ground the chrome off down to bare metal

Also cleaned up the inside of the bumpers, took wire wheel and some light sanding and sprayed with rust inhibitor

Primer and than paint

Also did some painting to the grille

Now for the taping, tape off bumpers where line will be for bedliner meets the paint. And taped off body for herculiner

Primed bumpers and than painted white

Here is after liner on the body, also did the side mirrors since they were chipped and flaking.

End result

Also cut holes before the liner for fogs, here they are installed.

Here is lowbeams without fogs,

And lowbeams with fogs on

Overall I think it turned out great, the hole in the bumpers I am looking for some LED's for semi trucks that will fill them in and light up nice at night.

 

[2doorfiend]

I dig the drool and that HUGE tip

 

[RAWVORTEC]

Second that

 

[autolover3]

haha thanks guys, I wasn't too sure about it after I put it on... been gettin some sh*t from couple classmates but I like it.

Around here everybody brags about their diesels and big tips, I'm showing it can still be pulled off with a half ton

 

[SouthernHoe]

Im not sure where I stand with this mod, I like it but I kinda like the factory paint on the rockers too. Either way good job on the work and thinking outside the box.

 

[autolover3]

Thanks! To each his own with opinions.

I think one should build a vehicle to suit his/her likes and not to impress others. That comes second

 

[Big Buttons]

DK how I feel about the white on the bumpers but the liner adds a certain toughness to trucks that is pretty cool.