Bell Tech 739SP install completed...

[iwaslowr]

Currently it's set as a 2.5/4, but that may change to a 3/5 after a few days if rubbing continues to be as minimal as it felt today. It rides great but the alignment hasn't been done yet so haven't taken it out on the highway yet. I know, it's dirty... but with this water rationing I'll be safe and wait to wash it in the morning...

 

[turboeclips]

looks good! from that pic, looks like there is definitely room for the 3/5

 

[NORCAL SS]

ive done a few of those kits if you have any alignment issues you will need the belltech front 2 degree alignment kit. truck looks great.

 

[Modded]

Looks tite man, I was just bugging you aout the complete install too lol.
I am going to get the rear 4" kit like you Iwaslowr, but how would you be able to get 5" out the back with the same kit?

 

[iwaslowr]

Thanks yall!

Looks tite man, I was just bugging you aout the complete install too lol.
I am going to get the rear 4" kit like you Iwaslowr, but how would you be able to get 5" out the back with the same kit?

I'll probably sell the rear portion of this kit and buy the McGaughy's 5" rear kit.

 

[COTahoeLS]

Looks very nice!! Something I would consider doing.

So if you considered selling the rear, would my rear look the same or would I have a lower rear with a absolute horrid front look? (stock for now)

 

[iwaslowr]

Looks very nice!! Something I would consider doing.

So if you considered selling the rear, would my rear look the same or would I have a lower rear with a absolute horrid front look? (stock for now)

It would have a CALI lean... unless you kept the 1" spacer in to limit the lowering to only 3" instead of 4". Let me know if you are interested in purchasing the rear kit which consists of springs, shocks and shorter bump stops.

I was riding the CALI lean for much longer than first predicted. Actually, when we first placed the tires back on the ground it only looked to be an inch lower. We were extremely frustrated... but drove it about three miles and BAM! Desired stance achieved!

 

[Modded]

Yeah Iwaslowr the same happened to me, the front seemmed to barely be lowered at first, but then after a drive to Firsetone for alignment it settled.
Myabe I will ask Tim about a rear 5" only kit and see what he says?
My Pedders kit supposedly lowered the back 3.25" according to their specs, but it had a bad Cali Lean until I installed the front portion so I think it may be more than that

 

[COTahoeLS]

I'm rolling on 24's. I'll take a picture tmw of the current stance with the stock shit in it and you can tell me then how it would look. How is towing effected with lowering?

 

[iwaslowr]

I'm rolling on 24's. I'll take a picture tmw of the current stance with the stock shit in it and you can tell me then how it would look. How is towing effected with lowering?

Here is the link to my other pics... scroll down to see the rear lowered only (4"). I have never towed, sorry.