Belltech 2" rear drop/level for autoride trucks

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
cmblack13

cmblack13

Built Motor Coming! :)
Joined
Jan 17, 2012
Posts
197
Reaction score
8
Location
Farmers Branch, Texas
Can a second spacer be added to the top of the spring to get a 2" drop in a non autoride? If so where can you get spacers?

not sure what your saying. I think the only difference in a non-autoride kit versus the autoride kit is the extra autoride linkages...thats the only thing different. Other than that I believe its the same kit across the board.
 

iwaslowr

ɹǝqɯǝɯ ɹoıuǝs
Joined
May 4, 2009
Posts
1,640
Reaction score
33
Location
Austin, Tx.
Can a second spacer be added to the top of the spring to get a 2" drop in a non autoride? If so where can you get spacers?

Bell Tech offers spacers however adding one to this kit will effectively increase the spring height by 1" and the amount of drop would be reduced to only 1" instead of 2".
 

Goodinblack

I Like Tacos
Supporting Member
Joined
Oct 27, 2011
Posts
22,295
Reaction score
3,040
Location
Dirty South
This is a 2/3 rear drop. I wanted to buy this set up but I did not want to use spacers. So now I have only a 2 inch spring coming from Tony.

But bump and good luck in the sale.
 

dpmhemi

TYF Newbie
Joined
Mar 17, 2012
Posts
19
Reaction score
0
Bell Tech offers spacers however adding one to this kit will effectively increase the spring height by 1" and the amount of drop would be reduced to only 1" instead of 2".

This is a 2/3 rear drop. I wanted to buy this set up but I did not want to use spacers. So now I have only a 2 inch spring coming from Tony.

But bump and good luck in the sale.

Ok maybe I'm wrong. I see the paperwork says a 2/3 drop but according to belltech's website and Tony's website it is a 3/4 for a non-autoride, links wouldn't be used. And I was thinking that the included spacer left out would give 4" and adding the space to the bottom of the spring would give a 3" drop. So I was wondering if a second 1" spacer could be added to the top of the spring to give a 2" drop.
 
OP
OP
cmblack13

cmblack13

Built Motor Coming! :)
Joined
Jan 17, 2012
Posts
197
Reaction score
8
Location
Farmers Branch, Texas
got it Doug! will send you tracking number most likely tomorrow or Monday.

---------- Post added at 10:37 PM ---------- Previous post was at 10:37 PM ----------

for anyone intrested I still have the Sway bar available for sale.
 

Forum statistics

Threads
132,200
Posts
1,863,833
Members
96,719
Latest member
Bassam
Top