project nightmare
TYF Newbie
Has anybody ever taken the buckets out and replaced them with a bench seat? And will a bench seat out of a silverado bolt up in place?
Bench seat conversion
- Thread starter project nightmare
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Stiffler63
Member
- Joined
- Jan 12, 2015
- Posts
- 39
- Reaction score
- 0
Im interested to know the answer as well.
I haven't personally done it, but given the documented ease of going from bench to buckets within the same style range (e.g. OBS-to-OBS), seems the reverse would be even easier since all the holes have already been appropriately drilled.
Last edited:
Bench to Buckets
I just swapped by bench seat to buckets. Straight forward, unbolt the old and bolt in the replacement. The only thing to keep in mind that the swap needs to be from the same wheel base, I.E. suburban to suburban not suburban to tahoe. The buckets/bench have different carpet trims that go along with the seats, so keep that in mind when track the seats down. If interested I have a 2nd Row Leather Ebony Bench out of a 2013 Yukon XL sitting in my basement if interested.
I just swapped by bench seat to buckets. Straight forward, unbolt the old and bolt in the replacement. The only thing to keep in mind that the swap needs to be from the same wheel base, I.E. suburban to suburban not suburban to tahoe. The buckets/bench have different carpet trims that go along with the seats, so keep that in mind when track the seats down. If interested I have a 2nd Row Leather Ebony Bench out of a 2013 Yukon XL sitting in my basement if interested.
