Best hose clamps to get.

[bigrhino]

I have a Airraid jr. installed on my Tahoe. At times the air intake comes loose. What can I do to solve this problem?

 

[Derick]

I have a Airraid jr. installed on my Tahoe. At times the air intake comes loose. What can I do to solve this problem?

Safety wire. I had similar happenings on my kawasaki concours....leaked coolant just 2 years after replacing all the rubber and the clamps. I bought SS clamps, and because there was no corrosion to help "lock it in" they back out. If you get some safety wire, you can secure the worm screw with it.

 

[Bandit-66]

i like to use this kind of clamps, they are very stable and do not cut into the rubber

https://schellenexpress.de/startsei...101-dimension-240_252_mm/200-bandbreite-26_mm

 

[wjburken]

@Rocket Man , you want to chime in here? Rumor has it you have a preference.

 

[Fless]

Here we go....

 

[gooffeyguy]

[emoji848]

Do they make spring clamps that large?

Sent from my SM-G930V using Tapatalk

 

[wjburken]

Here we go....

 

[exp500]

Breeze makes some good ones, the constant torque might be worth the expense here, or even just the liner type. Safety wire is a good tip also if clamp is loosening. Thanks Derick for the reminder.

 

[Monz11]

i like to use this kind of clamps, they are very stable and do not cut into the rubber

https://schellenexpress.de/startsei...101-dimension-240_252_mm/200-bandbreite-26_mm

Dierk,

whats the diff on the W1, W2, W4, W5 in asst. Is it sizes, bc it really doesnt say much

 

[Bandit-66]

Dierk,

whats the diff on the W1, W2, W4, W5 in asst. Is it sizes, bc it really doesnt say much

these are the material specifications and the sizes are in mm, not in inches

W1 completely made of galvanized steel
W2 Band and housing made of stainless steel 1.4016 Screw: galvanized steel
W4 Band, housing and screw made of stainless steel 1.4301 or equivalent corrosion-resistant steel
W5 made entirely of stainless steel 1.4401, 1.4436 or 1.4571