Best way to do a slight drop and keep the rake?

[cfmistry]

I think 2/2 would be perfect for me. All the pics I see of a 2/3 I think a little more rake would look good. Is there any way to do a 2/2 drop?

Thanks,
Cyrus

 

[Dantheman1540]

You could buy a 2/3 drop then add a 1" spacer in the rear to lift it back up 1".

 

[Big Mama]

Or buy the parts separately. The 3” drop springs only drop 2-21/2 inches. Here’s mine with 2/3

 

[Ilikemtb999]

2/3 has a bit of rake. 2/4 is level and to me can look saggy out back.


That’s mine with 2” drop knuckles and 3” belltech drop springs.

 

[Big Mama]

Agreed. The rear sloping roof line of these makes the rear look lower even if the fender heights are the same front and rear.

 

[chilleblanco36]

Here’s mine. Just finished a couple of weeks ago
Installed a kit I ordered from Tony(NorcalSS). Love it. Mine is more like a 2.5”/3” drop. It was a 3/3 until I removed one additional ring from under the front spring perch of the new struts. It was recommended to go with 1-10mm and 3-8mm. It say level at that point which did at times appear to have a sag, but it sat level on all corners at 44”. Now it sits at 43.5” front and 44” in the rear. I love it

Before lowering


After lowering, but before removing 1-8mm spacer



Final after removing one 8mm spacer


Sent from my iPhone using Tapatalk

 

[chilleblanco36]

Here’s mine. Just finished a couple of weeks ago
Installed a kit I ordered from Tony(NorcalSS). Love it. Mine is more like a 2.5”/3” drop. It was a 3/3 until I removed one additional ring from under the front spring perch of the new struts. It was recommended to go with 1-10mm and 3-8mm. It say level at that point which did at times appear to have a sag, but it sat level on all corners at 44”. Now it sits at 43.5” front and 44” in the rear. I love it

Before lowering


After lowering, but before removing 1-8mm spacer



Final after removing one 8mm spacer


Sent from my iPhone using Tapatalk

Here’s the final look



Sent from my iPhone using Tapatalk

 

[Big Mama]

Looks great. The roof line on the gmt900 makes the rear appear lower even when it’s not.