Big three upgrade

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

boomboom baker

Full Access Member
Joined
Oct 22, 2015
Posts
134
Reaction score
17
Location
Tennessee
Anyone have pics of their big three upgrade on their tahoe I don't no were to run my grounds
 

Searay45db

Full Access Member
Joined
Sep 8, 2016
Posts
152
Reaction score
18
Location
Philadelphia
Please be a little bit more specific. I have zero gauge running to the back to run a winch for my boat. I have another set of zero gauge that comes up under the middle row, runs a big ass investor to run a washing machine...if I needed to. Engine is even easier. What are you trying to do?
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
26,317
Reaction score
39,473
Location
Stockton, Ca.
run one directly from positive battery terminal to alternator output terminal, one from negative battery terminal to alternator mounting bracket, run one from battery negative terminal to frame
 

05Single

afraid of the dark
Joined
Feb 26, 2015
Posts
8,186
Reaction score
11,456
Honestly this mod should be a sticky , with pics and step by step instructions. I know it's super simple but it's a popular upgrade.
I would make a thread but I haven't done the big 3 yet.
 

affliction4

Full Access Member
Joined
Aug 28, 2015
Posts
103
Reaction score
35
What is a big three upgrade?

The Big Three wiring upgrade
A good, cost-effective improvement is to perform the "Big Three" electrical upgrade. This will vastly improve your vehicle's electrical system, allowing more current to flow easier to all components. This upgrade replaces or augments three key cables in the electrical system with 1/0 or 4 gauge wires: the battery ground to chassis wire, the chassis to engine block wire, and the alternator plus to battery plus wire. This increases your electrical system's current flow capability, ensuring a more consistent voltage under varying demand conditions.

An unfortunate possible side effect of doing the Big Three is that occasionally it only makes your lights dim even worse. This happens because the amplifier is now able to suck juice better from the system through the bigger straw (the new cables).
 

xDan

Member
Joined
Nov 3, 2017
Posts
89
Reaction score
40
The Big Three wiring upgrade
A good, cost-effective improvement is to perform the "Big Three" electrical upgrade. This will vastly improve your vehicle's electrical system, allowing more current to flow easier to all components. This upgrade replaces or augments three key cables in the electrical system with 1/0 or 4 gauge wires: the battery ground to chassis wire, the chassis to engine block wire, and the alternator plus to battery plus wire. This increases your electrical system's current flow capability, ensuring a more consistent voltage under varying demand conditions.

An unfortunate possible side effect of doing the Big Three is that occasionally it only makes your lights dim even worse. This happens because the amplifier is now able to suck juice better from the system through the bigger straw (the new cables).

If your lights dim after this upgrade, it's also time to put in a 200 amp alternator I'm thinkin. Maybe some massive amp power caps too.
 

Forum statistics

Threads
132,436
Posts
1,868,131
Members
97,115
Latest member
sher
Top