brake upgrade!( 07 fronts)

[slocaddy]

im finaily tired of listing to jinglebells everytime i go over bumps, and with 165,000 and who knows if brakes were ever done- i orderd parts! Got some drilled and slotted rotors 07 fronts stock rears, they are supposed to match. ill probably use the pads they come with for now they supposedly some kind ''performance ceramic''. just have to get calipers and brakets now. will post pics when i do the job.

 

[sumo]

Nice, but i hear it better to go just slotted though. What you end up getting?

 

[slocaddy]

drilled and slotted. is that because drill holes are prone to craking? had the option of either or bolth, didnt even think of that.

 

[Huck]

Unless you're racing drilled rotors are perfectly fine. You're not putting the type of stress on them that is going to cause cracking. Slotted rotors may force you to replace the pads more often, but it's not a huge difference.

 

[slocaddy]

well these brakes are incredible! only done a short amount driving. deff the best bang for your buck, if your going to spend money on your brakes anyway might as well spend a little more for this stuff! I have never driven any aftermarket brake systems so i cant give a compairison, but considering what those systems go for( deff out of of reach for me! ) i dont think this can be beat.
my parts are:
07 loaded calipers(because you have to get the caliper braket also)
07 front rotors/ 03 rears(got mine off ebay and were the same thikness as stock
ceramic pads nothing special
Ive got about $500 into this doing it myself, THIS IS DIRECT BOLT ON! nothing special needed! only thing im not sure of is if it will clear the 16'' spare. go to my albums for some pics.

 

[blueflamed03]

wow...good deal, so all you did was order 07 rotors, front and rear, and front and rear 07-up calipers?

 

[slocaddy]

rears are stock 03's (calipers and rotors). Ive read that the 07 and up rears are actually smaller. Only the fronts are 07 and up.(rotors and calipers ) just make sure you get the caliper braket also. only way i could get them where i am was to buy a ''loaded caliper''

 

[jdpber]

where did you get your calipers? are they dual or single piston calipers? and what size are they over the stock 03 model ones

 

[slocaddy]

napa for calipers- the rotor is an inch bigger. the calipers are 2 piston and are also bigger in size.
theres a pic of the old front rotor and new one side by side in my album.

 

[TheYuk]

You can get the calipers without getting them loaded with pads but still come with bracket. The CARQUEST part numbers are, Left 18B-4919, Right 18B-4918, and 90% of stores keep them in stock and if not they are readly avalable.