Brush guard removal help

[04z71]

I just bought an 04 Tahoe Z71 that had a brush guard on it.Want to take the brush guard off and sell it. I Removed the brackets that tie in near the tow books,and the ones that go on top of the bumper. The brush guard is off. However, there are two more brackets tied in near the radiator supper that go to the back of the bumper with a tall bolt and plastic spacer. These overlapped with the brackets that went from top of the bumper to brush guard. Are these factory or from the brush guard? Want to make sure I give the buyer everything needed.

 

[El Capitan]

Pics would be helpful

 

[Donnie Yukonie]

x2 I lost you at the last part ...

 

[MrBalll]

Any photos so we can help you?

 

[04z71]

Sorry I'll try to get photos but let me see if this helps.

1- bracket went from the brush guard to top of bumper right behind grill.
2-at that point, it shared a bolt with another bracket that goes to radiator support.
3- the bolt that ties these two brackets together is long and has a plastic spacer with it. The bumper has a slight notch in it to allow for this bolt.

Question is- is this bolt,spacer, and radiator support bracket part of brush guard or from factory?

 

[MrBalll]

When you say radiator support are you talking about your main radiator or did they possibly have an aftermarket one in there at one point?

The photos will really help. Just make sure it's good lighting and not overly blurry so we can see it all.