Button lights burnt out how to fix?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

NCTyphoonKid

Full Access Member
Joined
Jan 14, 2014
Posts
291
Reaction score
67
Location
Trinity, NC
A good portion of my interior lights are burnt out like the window switch buttons, headlight control lights, radio lights, you get the idea. Does anyone have a how to for replacing these? I tried searching but couldn’t find anything. Really don’t want to change the color of the lighting either would like to keep the oe look
 
OP
OP
NCTyphoonKid

NCTyphoonKid

Full Access Member
Joined
Jan 14, 2014
Posts
291
Reaction score
67
Location
Trinity, NC
I know there is a how-to (several actually) but I'm not sure what/where the link is...

ETA, stickied in this section: https://www.tahoeyukonforum.com/threads/2003-tahoe-ac-control-module-replace-bulbs.53361/

Replacing in other modules should be similar, just carefully disassemble and replace with LED + resistor

Do you think majority of the bulbs we be the same? Also is there a color i need to get to keep the oem look? I’m assuming a white led would be ok?
 

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
19,784
Reaction score
26,698
Location
Treasure Coast, Florida
Make sure the LEDs are high quality to withstand the rigors of bouncing around in an automobile. It's a pain to take these apart and un solder and solder, I have to do it to the radio in our '04 Pontiac.
 
OP
OP
NCTyphoonKid

NCTyphoonKid

Full Access Member
Joined
Jan 14, 2014
Posts
291
Reaction score
67
Location
Trinity, NC
Make sure the LEDs are high quality to withstand the rigors of bouncing around in an automobile. It's a pain to take these apart and un solder and solder, I have to do it to the radio in our '04 Pontiac.

Do you have any recommendations on where to buy?
 

SnowDrifter

Full Access Member
Joined
Sep 5, 2016
Posts
2,441
Reaction score
2,681
Location
Washington. The desert side not the Starbucks side
Make sure the LEDs are high quality to withstand the rigors of bouncing around in an automobile. It's a pain to take these apart and un solder and solder, I have to do it to the radio in our '04 Pontiac.
Do you know if anyone offers the service professionally? I have some that need to be done and quite frankly, I'd rather pay to offload it to someone else LOL
 

Forum statistics

Threads
132,764
Posts
1,873,841
Members
97,596
Latest member
pugnaxx
Top