Camera button found on 2024 Denali

[wheelmanrob]

Curious if the added camera button is compatible with the 2021 Yukon Denali. The Vehicle Stability Control System Switch (PN 85607776) is located to the left of the steering wheel near the HUD & Auto Start Stop buttons. I think this started for MY 2023 or 2024.

On our 2021, the exterior cameras are only accessible through the main 10" center console home screen. I sent a message to HarnessDr.com to see if they would make a harness, assuming you get a harness and new switch cluster would it be possible to make it work? Maybe a harness is not required and its plug and play? Someone must know.

Pictured is my current button cluster. The new one has an added camera button.

 

[WalleyeMikeIII]

Installed an Auto Start/Stop Eliminator… works great, buy one!

Just do it, its worth it as ours always seems to find the worst time to shutoff. Also if anyone has a 20-21, you can add the updated switch part from the 2022 that includes the 360 camera button at the same time so you're not taking the dash apart twice

www.tahoeyukonforum.com

Check post 20 of that thread

 

[wheelmanrob]

Installed an Auto Start/Stop Eliminator… works great, buy one!

Just do it, its worth it as ours always seems to find the worst time to shutoff. Also if anyone has a 20-21, you can add the updated switch part from the 2022 that includes the 360 camera button at the same time so you're not taking the dash apart twice

www.tahoeyukonforum.com

Check post 20 of that thread

That is awesome. Very much appreciated. Going to buy this and install it.

 

[WalleyeMikeIII]

Use mine every day