Can’t find info on dash removal

[ItstheHOFF]

Anyone know of a good write up or video on how to remove the dash panels? Specifically the top panels. I’m trying to investigate a rattle but I want to do it right and not just start prying and end up breaking something. Links to write ups already posted are welcome and I apologize if a similar post already exists

 

[ItstheHOFF]

Seriously, no one has done this or has info on this? Quite surprising

 

[Trippers99hoe]

2007 Yukon Dash Replacment Instructions

2007 Yukon Dash Replacement Instructions 2007 Yukon Dash Panel Replacement Instructions Before You Start I would not recommend for anyone who does not have the basic mechanical skills needed to remove these panels, switches and sensitive components to complete this task. You must consider...

www.tahoeyukonforum.com

 

[ItstheHOFF]

2007 Yukon Dash Replacment Instructions

2007 Yukon Dash Replacement Instructions 2007 Yukon Dash Panel Replacement Instructions Before You Start I would not recommend for anyone who does not have the basic mechanical skills needed to remove these panels, switches and sensitive components to complete this task. You must consider...

www.tahoeyukonforum.com

I apologize if I posted in the ring category, but I was looking for 2015-2020

 

[Donnie Yukonie]

Your in the right category. but with those trucks still being "quite new" most guys probably haven't dug into them yet. have you tried YouTube?

 

[ItstheHOFF]

Yes. Honestly, it’s been 6 years since this model has been out. What’s the hold up?!

 

[Doubeleive]

start watching videos on how to change the cluster and radio that will get you part of the way, some pieces just pry off with clips, then look at how to change the cabin filter and you will see how the glove box comes off, then watch how to change the dash speakers that part also clips off, after those you will be part way there.
you will need to take the left & right pillar covers off also, everything fits together like a puzzle

 

[Donnie Yukonie]

Yes. Honestly, it’s been 6 years since this model has been out. What’s the hold up?!

Thats a fair point 6 years is long enough for @yates ™ to take a truck from stock to modded back to stock and PRAWFIT.