can i use LCA and Spindles together

[justblazz00]

i have an 03 denali xl and wanting to see if i can run LCA and spindles together or will that be too low . and in the rear what should i run . im running 24's and want the lowest as possible but keep a really good ride . i still pull with it so i need to keep the ride rite . any suggestions would help

 

[Travieso]

3/5 Drop

 

[JKmotorsports]

You can use both, but with 24s, you might be sitting too low. I'm using 2" spindles with the keys cranked down and I'm sitting just above the tire. Currently I'm using DJM 5" coils in the rear and I dont have any problems towing the boat or loaded car trailers.

 

[justblazz00]

so a 3/5 sounds like the plan . whats the best kit that i should use . plus im wanting to get front/rear swaybars .

 

[thehoe92]

DJM kit will handle the weight better because they have a stiffer spring
Belltech has among the best ride quality
but a vendor on here "DJM DIRECT" has been doing testing with the TrailBlazer SS drop coils that are a better ride than the Belltech and will sit you lower

talk to him for 3/5 kit he does both DJM and Belltech
any other company and you will probably be disappointed with a 3/5 kit

 

[JKmotorsports]

If you decide to go with the softer Trailblazer SS coils like mentioned above, you might need a set of helper bags for the rear if you tow anything heavy.

 

[NORCAL SS]

honestly id go with 3 inch a arms front and rear djm hardware kit, djm shocks and with the trailblazer 4 inch drop spring and ride will be great.

 

[justblazz00]

what about the auto ride . i was wanting to keep it or should i get read of it

 

[NORCAL SS]

if you get rid of it will go down farther and still ride great with the set up i hinted to above.

 

[justblazz00]

i just dont want it to sag when im pulling something or should I just bag the rear. price check on the stuff u said to use .