Center Seat Flap keeper

[abishoff]

The plastic keeper piece that hold the back flap from the center seat broke. Is that individually replacable and how?

 

[Rivieraracing]

Gotta post up a picture of what you are talking about!

 

[SnowBuck]

Broke in what way? Mine wouldn't "flip" because the lateral pin it pivots on slipped to one side. To get it out, slide a screwdriver under the OUTSIDE edge and push in the tab and pull up slightly, repeat on the other side.
I positioned that pin correctly and tapped it back in place. Fixed!

 

[SnowBuck]

The plastic keeper piece that hold the back flap from the center seat broke. Is that individually replacable and how?

You can get them easy...about $10-15:
GM 12477414

 

[Tonyrodz]

You can get them easy...about $10-15:
GM 12477414

Which piece is this ? Got a pic?

 

[SnowBuck]

Cut & Past that number in to any search engine...Google...Explorer...anything. Maybe tomorrow during the day I can go out and take a pic.

 

[abishoff]

You can get them easy...about $10-15:
GM 12477414

Do you know how to take it out of the seat? I pryed on it and it stayed firm in the back of the seat.

 

[SnowBuck]

Do you know how to take it out of the seat? I pryed on it and it stayed firm in the back of the seat.

Easy...I think I addressed this before. Slide a screwdriver under the front and/or back of it
UNDER the lip and push while prying up. Once out look to see if the pivot rod is out on one side. You can just reposition it back...or buy new which is cheap.