Changer Problem

[Noto81]

Anybody run into the situation when the CD player says "initializing" then won't do anything? Its a 6 disc factory changer and it was full and now its not reading a disc in slot 4 but nothing ever ejected and still won't do anything. Also, the lights in the slot are lit up but nothing is happening. Any tips? Thanks

 

[tsb09000]

This sounds like what happened to mine years ago. Mine had a cd stuck in it which was a pretty easy fix but it ruined the cd. Take the radio out and see if you can see the bottom of the cd anywhere. I just took a pocket knife and helped it out. Make sure all the other cds are out first if you can. That's about all I remember but hopefully it'll fix yours too!

 

[Noto81]

This sounds like what happened to mine years ago. Mine had a cd stuck in it which was a pretty easy fix but it ruined the cd. Take the radio out and see if you can see the bottom of the cd anywhere. I just took a pocket knife and helped it out. Make sure all the other cds are out first if you can. That's about all I remember but hopefully it'll fix yours too!

Problem is that the changer was full so there's 6 cd's in there and it won't do anything. The cd icon blinks until i hit eject but i don't hear any noise indicating anything happening.

 

[PJS3]

AAAARRRRRGGGGHHHHH.... Yet another of these threads with NO answer in it!!!!!

Does ANYBODY have a fix that's better than "replacing" the unit? I have no warranty and I have no budget for a $500 replacement...

 

[saleen_n_around]

Just bought an 03 last night and yup same problem number 4......FML