cj5 going big project

[MUDDER TRUCKER]

pulled the amc360 in my jeep, started to fix everything

to big to go in the garage. had to pull the cage windshield and seats











my beer drinkin spot!!!

good thing i checked the cam gear, it was toast

my bad bearings


gettin ready to clean the block!



most of my parts came in today , still waiting for the exaust valve and cam bearings

---------- Post added at 03:48 PM ---------- Previous post was at 02:10 PM ----------


got some parts in

 

[tast101]

Looks like fun.

I need to find me a mechanic friend to help me work on my Truck when I'm ready. I like to do alot myself, but no time to learn or have a extra ride to use.

 

[MUDDER TRUCKER]

yeah its alot cheaper! the money i could pay someone to do it i can just put into better parts and do it myself. the motor is a 76 amc360 2 barrel, stock 180hp,i want to be in the 425hp range, im going 60 over,flat top pistons, bigger cam, pretty much every thing is changing and will be new when im done!!

 

[MUDDER TRUCKER]

changing out the valve stem seals



this was a pain in the ass

---------- Post added at 02:32 PM ---------- Previous post was at 02:28 PM ----------

just got done making my traction bar!

 

[tast101]

I really wish I could break some stuff down, strip and repaint it. Maybe in the future when I have time, money and another car to use as a DD.

 

[puckhead]

Nice dude! Ive always wanted a rig like that to take out and rumble.

 

[MUDDER TRUCKER]

well i decided to take the block in to get the cam bearings put in, i f'd up the first set. got one head almost cleaned up and the block almost done. one more head and the intake to do now. ordered new valve covers, red and silver fan,tons of bolts, new black oil pan, a few new gears,and got some engine paint and primer today!!! omg the list of new stuff just goes on and on!!!!!

---------- Post added at 11:34 PM ---------- Previous post was at 11:33 PM ----------

 

[JKmotorsports]

Are you planning on any head work? You can get closer to your hp goal a lot easier if you do a head swap or work over your stock heads. Also swapping the intake and carb to a four barrel setup will help bring in more air and fuel to feed the larger cam/head combo.
Looks like a cool project man. That's a badass Jeep. Keep the progress pics coming.

 

[MUDDER TRUCKER]

got some more goodies!

new double roller timing chain and gears! also the cam

 

[MUDDER TRUCKER]

more stuff came today!!!! fan,oil pan bolts, cam dist gear,valve covers. cant wait to get it together!!!!